آلة اختبار التآكل DIN ISO 4649 أستم D5963
- وصف
- سؤال
وصف
آلة اختبار التآكل DIN ISO 4649 أستم D5963
طلب
DIN Rubber Wear Abrasion Tester is used to test the friction of surface by a particular piece of abrasive paper, After wear for a certain time, and then assess the condition of material surface, وزن, volume and thickness, from this standard to assess the abrasive nature of materials, as such elastic material, ممحاة, الإطارات, convey belt, transmit belt, نعل, synthetic leather, leather and others
آلة اختبار التآكل DIN ISO 4649 أستم D5963
مبدأ
Under a predetermined contact pressure and a given area ,the specimen with sandpaper angled to measureabrasion resistance of the specimen subjected to rubbing on a certain level of sandpaper, sandpaper affixed to the surface of the drum, samples pressed on a drum with sandpaper, and the specimen along the roller to the lateral movement, abrasion resistance is produced at one end of the cylindrical specimen, tests the value of the mass loss of the specimen, by the density of the specimen to calculate the amount of volume abrasion.
DIN ISO 4649:2006-11 (ه). ممحاة, vulcanized or thermoplastic – Determination of abrasion resistance using a rotating cylindrical drum device.
أستم D5963 – 04(2010)e1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader).
آلة اختبار التآكل DIN ISO 4649 أستم D5963
تحديد
معايير التصميم | DIN-53516,ISO-4649,GB/T9867
|
Specimen size | diameter 16mm, ارتفاع 6-16 مم |
Load | 2.5ن,5ن,10ن |
Rotating wheel | diameter 150mm, length 460mm, rotating speed 40rpm |
Roller rotation speed | 40دورة في الدقيقة |
Remove range | 4.2mm/R.P.M. |
سرعة | 19.2m/minute |
مُكَمِّلات | Sand paper,standard glue,sample cutter. |
وزن | 40كلغ |
Dimention | 85×32×40cm |
قوة | 1Ø, تيار متردد 220 فولت, 50 ~60Hz 3A |