ISO1133 ASTM D1238 Melt flow rate testing instrument
- وصف
- سؤال
وصف
ISO1133-2011 ASTM D1238 Melt flow rate testing instrument
Discription:
Melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, البلاستيك الفلور, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.
معيار:
GB/T3682-2018,ISO1133-2011, أستم D1238
ISO1133-2011 ASTM D1238 Melt flow rate testing instrument
شخصية المنتج:
1.English LCD Touched Screen.
2.Hand automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
- Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
Test Methods:MFR Methods
Display Mode:English color touch screen display
ISO1133-2011 ASTM D1238 Melt flow rate testing instrument
تخصيص
| نموذج | LR-A001-A |
| Barrel parameters | Inner hole 9.550±0.005mm |
| Pistons parameters | Piston head: 9.474±0.005mm |
| Outlet length | 8.000±0.025mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| نطاق درجة حرارة | Room Temperature~450degree centigrade |
| Temperature fluctuation | ±0.2 ℃ |
| توحيد درجة الحرارة | ±1 درجة مئوية |
| دقة عرض درجة الحرارة | 0.1درجه مئوية |
| Display resolution | 0.1درجه مئوية |
| Maximum comsuption | < 600دبليو |
| Time display resolution | 0.1س |
| Weight parameters are as follows: | |
| Weight accuracy | ±0.5% |
| التكوين الأساسي
| A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6kg | |
| Position detection | |
| Loop distance from up and down | 30مم |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 دقيقة. |
| Material be installed | 1 دقيقة. |
| Material sample temperature recovery time | 4 دقيقة. |
| When binder set | 1دقيقة |
| Output mode | Micro-automatic print output |
| Cut material methods | The hand automatic cut into one body |
| Test load | Eight sets of weights |
| قوة | AC220V±10% 50/60HZ |
