Keterangan

6 Bank Shear Tester Adhesive Tape Shear Test Machine ASTM D3654

Perkenalan

Under the condition of constant load, suhu (23+-1)C dan kelembaban relatif (50+-5)%, the stickiness of adhesive tape to standard steel plate was measured by the failure time of adhesive tape.Stickiness to standard steel plate: a adhesive tape is pasted to a standard steel plate at a controlled rolling rate.The steel plate is installed vertically or horizontally, and a standard weight is hung at the free end of the adhesive tape to determine the time of adhesive failure.

Catatan: The vertical method is used for the measurement of stickiness with failure time less than 4h/the horizontal method is used for the measurement of stickiness with failure time greater than 4h

Vertical method Level method

6 Bank Shear Tester Adhesive Tape Shear Test Machine ASTM D3654

Lingkup aplikasi

It is suitable for adhesive tape, protective film, label, plaster and other products to carry out stickiness test. The resistance of adhesive samples to pull-off can be represented by the displacement of adhesive samples or the time when the samples are completely detached after a certain period of time.

pita perekat protective film label sticking-pla

Standar

GB/T 4851-2014 Test Method for stickiness of Pressure-sensitive adhesive Tapes

ASTM D3654-2019 Standard Test Method for Shear Viscosity of Pressure-sensitive adhesive Tapes

JIS Z0237-2000 Test Method for pressure-sensitive adhesive tapes and Pressure-sensitive adhesive sheets

6 Bank Shear Tester Adhesive Tape Shear Test Machine ASTM D3654

Teknis spesifikasi

Fitur instrumen

1.The test plate and test weight are designed in strict accordance with the standard to ensure the accuracy of test data.

2.More than test stations can carry out multiple groups of test items simultaneously.

3.Automatic timing, locking and other functions further ensure high accuracy of test results.

The factory accessories

1kg weights (6 bagian-bagian) Piring uji (6 bagian-bagian)

Loading plate (6bagian-bagian) Hand press wheel (1bagian)

Metode operasi

1 2 3 4 5

6 7 8

1.Wipe the surface of the steel plate until clean and dry for 10min.

2.Obtain multiple samples according to standard requirements.

3.Align the steel plate calibration at the end of the sample.

4.Roll the sample onto the steel plate at a speed of 10mm/s under dead weight (old standard 3 back and forth).

5.Pass the other end of the sample through the loading plate, fold it in half and bind the staple (test within 1min, old standard 20min)

6.Press the reset button to reset the time

7.Hang the test sample on the test stand.

8.Gently insert the weight into the loading plate to prevent shear impact force.

9.Test results.(Record the time at which the specimen is completely separated from the steel plate or the distance at which the specimen falls from the steel plate scale in a specified time)

10. Clean and return(Wipe the steel plate, loading plate and weight into the special box)

Notes for operation

The machine should be kept level and stable.

Clean and wipe the steel plate after the test.

In order to ensure the uniform stress of the sample, the sample should be centered and pasted on the steel plate.

4. Please be operated by professionals to avoid improper use.