- Descrizione
- Inchiesta
Descrizione
Caratteristiche:
- With built-in thermalprinter
- PC Software for data transmission, analysis and measurement reports printing
- Direct calibrate on HL,HRC,HB, and freelyswitch to 6 different hardness scales
- Test at any angleand direction, anche sottosopra
- Large LCD screen with back-light, mostrando tutte le funzioni e i parametri
- Conversione in resistenza alla trazione (U.T.S)
- Rechargeable Li-ionbattery
Measuring Materials:
- Acciaio e acciaio fuso, alloy tool steel, acciaio inossidabile, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (ottone), an alloy of copper and tin, rame (bronzo), forged steel.
Specifica tecnica
| Modello | leeb140 |
| Campo di misura | (170-960)HLD,(17.9-69.5)HRC,(19-683)HB,(80-1042)alta tensione, (30.6-102.6)SA, (59.1-88)HRA, (13.5-101.7)HRB |
| Hardness parameter | HL, HRC,HRB, SA,HB,alta tensione |
| Precisione | ±6HLD/ ±1.5HRC |
| Schermo | LCD with back-light |
| Memoria | 600 gruppi |
| Connessione al PC | Available |
| Stampante | Build-in High-speed Thermal Printer, Width for printer paper:44.5±0.5mm |
| Battery type | Rechargeable Li-ion battery |
| Operating temperature | -20℃~+60℃ |
| Dimensioni | 230×86×46mm |
| Impact Device Type | D,DC,DL,D+15,G,C,E |
| Peso | 400G |
| Consegna standard | Main unit,Impact Device type D,Operation manual,Adattatore di alimentazione,Small supporting ring,Cleaning brush,Certificato,Calibration block,paper of Printer. |
| accessori opzionali | Dispositivi di impatto opzionali、Shaped support ring、Paper for printer |
