説明

製品の使用:

This machine is specially used to test the damage of product package to fall and evaluate the applicable standard of impact strength during transportation and transportation: ISO2248 jisz0202-87 GB/ t4857.5-92

Machine features:

Single arm drop tester can perform free drop test on the surface, Angle and edge of the package, equipped with digital height indicator and decoder for height tracking, so that the product drop height can be accurately given, and the error with the preset drop height should not exceed 2% or 10MM.The machine adopts single arm and double column structure, with electric reset, electric drop control and electric lift device.The unique buffering device greatly improves the service life, stability and safety of the machine.Single arm setting, easy to place product.

主な技術パラメータ:

1. Drop height mm: 300-1500 調整可能な
2. Maximum weight of specimens: 0-80kg;
3. Base thickness: 10んん (solid iron plate)
4. Maximum size of specimen mm: 800 バツ 800 バツ 1000
5. Impact panel size mm: 1700 バツ 1200
6. Drop height error: + / – 10んん
7. Appearance and size of the test bench mm: について 1700 バツ 1200 バツ 2315
8. Net weight kg: about 300kg;
9. 試験方法: surface, Angle and edge drop in all directions
10. 制御モード: 電気の
11. Fall height error: 1%
12. Parallel error of hitting panel: less than or equal to 1 程度
13. Error of Angle between falling surface and level during falling: no more than 1 程度
14. 電源: 380V1; 電源: AC380V 50HZ
15. 力: 1.85KWA

Machine studio environment requirements

28 ℃ temperature: 5 ℃～ + [1] average temperature 28 ℃ or less (24 時間)

相対湿度: less than 85%RH

Power supply conditions three-phase four-wire + protection ground line,

Voltage range: 交流 (380 + / 38) V