LR-A001-B Smeltindextester met aanraakscherm MFR MVR-test
- Beschrijving
- Navraag
Beschrijving
LR-A001-B Smeltindextester met aanraakscherm MFR MVR-test
Discription:
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluor kunststof, nylon en andere technische kunststoffen, kan ook op polyethyleen worden toegepast (PE), polystyreen (PS), polypropyleen (PP), ABS-hars, polyformaldehyde (POM), polycarbonaat (PC) resin with lower melting temperature, zoals plastictest, veel gebruikt bij de productie van plastic, plastic producten, such as petroleum and chemical industry and related colleges and universities, wetenschappelijke onderzoekseenheden, and the commodity inspection department.
Standaard:
GB/T3682-2000 《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ISO 1133：1997《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ASTM D1238 《Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer》
Test Methods:MFR+MVR Methods
LR-A001-B Smeltindextester met aanraakscherm MFR MVR-test
Weergavemodus: 7-inch touch screen controller
| Model | LR-A001-B |
| Barrel parameters | Inner hole 9.55±0.025mm |
| Pistons parameters | Piston head: 9.475±0.015mm |
| Outlet length | 8.000±0.025mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| Temperatuurbereik | Room Temperature~450degree centigrade |
| Temperature fluctuation | ±0.2 ℃ |
| Temperature uniformity | ±1℃ |
| Temperature display resolution | 0.1℃ |
| Display resolution | 0.1℃ |
| Maximum comsuption | < 600W |
| Time display resolution | 0.1S |
| Weight parameters are as follows: | |
| Weight accuracy | ±0,5% |
| Basisconfiguratie
| A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6kg | |
| Position detection | |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min. |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
| Output mode | Micro-automatic print output |
| Cut material methods | The hand automatic cut into one body |
| Test load | Eight sets of weights |
| Stroom | AC220V±10% 50/60HZ |
