LR-A001-C Automatisch ladende smeltindextester
- Beschrijving
- Navraag
Beschrijving
Discription:
This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, kan ook op polyethyleen worden toegepast (PE), polystyreen (PS), polypropyleen (PP), ABS-hars, polyformaldehyde (POM), polycarbonaat (PC) resin with lower melting temperature, zoals plastictest, veel gebruikt bij de productie van plastic, plastic producten, petrochemical industry and related colleges and universities.
Standaard:
GB/T3682-2000,ISO1133-97, ASTM1238
Model | LR-A001-C |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Outlet length | 8.000±0.025mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Temperatuurbereik | Room Temperature~450degree centigrade |
Temperature fluctuation | ±0.2 ℃ |
Temperature uniformity | ±1℃ |
Temperature display resolution | 0.1℃ |
Display resolution | 0.1℃ |
Maximum comsuption | < 600W |
Time display resolution | 0.1S |
Weight parameters are as follows: | |
Weight accuracy | ±0,5% |
Basisconfiguratie
| A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Position detection | |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 min. |
Material be installed | 1 min. |
Material sample temperature recovery time | 4 min. |
When binder set | 1min |
Uitvoermodus | Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
Test load | Eight sets of weights |
Stroom | AC220V±10% 50/60HZ |