LR-WES-300B Digital Display Hydraulic Universal Testing Machine

  • Description
  • Contact Online

1,Introduction

The main engine is two columns, two bars, oil cylinder, and the stretch space is above the host, and the compression and bending test space is between the lower beam of the host and the table.The measuring instrument adopts high definition LCD display, the experimental data is convenient and intuitive.

2.Transmission system

The lower beam can be adjusted by using the motor driven by the reducer, the chain drive mechanism and the screw side drive, and realize the adjustment of the drawing and compression space.

3,The hydraulic system

The hydraulic oil in the oil tank pumps the high-pressure pump into the oil circuit through the motor, which flows through the high pressure filter and sends back the oil valve and enters the cylinder.The measuring instrument collects and analyzes the data through the sensor, and shows the constant force value. The tester realizes the speed of the test force by controlling the flow through the oil delivery valve.

Max force锛坘N锛 300
Test force measurement range 4%-100%
Test force indication relative error 锛 The value for卤1%
Maximum tensile test space锛坢m锛 600
Compression space锛坢m锛 500
The piston stroke(mm) 200
Column spacing锛坢m锛 455
The maximum clamping range of a round sample锛坢m锛 桅6-桅26
The maximum clamping thickness of flat sample锛坢m锛 0-30
The maximum clamping width of flat sample锛坢m锛 75
The pressure plate size锛坢m锛 蠁160mm
The maximum distance between two points of bending support锛坢m锛 300
Bend the roll width锛坢m锛 140
The clamping way Hydraulic automatic clamping
Main frame size锛坢m锛 750*600*2000
Oil source console size锛坢m锛 600脳500脳1250
Total motor power锛坘W锛 2
The total weight锛坘g锛 1480