LR-B004-A Промышленная печь
- Описание
- Расследование
Описание
LR-B004-A Промышленная печь
Использование
This machine can provide a stable test space for pre-heating, сушка, changes about physics and chemistry testing . It supplys precision temperature controllter with high stability of platinum resistance to temperature that makes temperature well-distribution.
LR-B004-A Промышленная печь
Structure And Size
- Внутренний размер: 450(ширина) Икс 400(глубина) Икс 400(высота)мм
- Внешний размер: 720(широкий) Икс 580(deep) Икс 990(высокий)mm+110mm trundle, subject to the real object;
- Operation panel: the control panel is above the machine (as shown);
- Opening method: single door opens from right to left;
- Viewable window: visible window on the door: Спецификация: W200*H250mm;
- The inner material is: 430# mirror plate, 1.0толщина мм;
- The outer material is: cold-rolled steel plate, 1.0толщина мм.
- Interlayer: there are two inner layers, and two meshes;
- Thermal insulation material: glass fiber rock wool, with good thermal insulation effect;
- Sealing material: high-temperature foamed silica gel bar;
- Install brake movable casters on the machine;
- The overall structure is floor-type.
LR-B004-A Промышленная печь
Контроль температуры система
- The temperature control instrument is PID digital display instrument (taichung instrument in Taiwan), single-point temperature control, which can be automatically calculated, PV/SV simultaneously displayed, button setting;
- Timer setting: от 1 второй после 9999 часы (optional setting hours, minutes and seconds) when the temperature reaches time, when the heating current is stopped, and an alarm is prompted at the same time;
- Temperature line (К) тип;
- Signal output is 3-32v;
- The heating controller is: solid relay SSR without contact;
- Heating material: heat resistant tube;
7, диапазон температур: 50 ~ 300 ℃ adjustable, commonly used temperature within 260℃;
8, rate of temperature: 100 ℃ about 15 минуты
9, the control precision, ± 0.5 ℃;
10, точность отображения: 0.1 ℃
11, temperature deviation: 50-200 ℃ ±2.0 ℃, 201-300 ℃±3.0 ℃. (no-load test)
Air supply system
- Air supply mode: internal horizontal hot air circulation;
- The motor is temperature-resistant special type, with motor power of 370W/220V;
- The fan is 7.5-inch multi-wing turbine type;
- The air inlet is on the right side of the machine and the air outlet is on the left side of the machine.
Власть Сupply Device
- Voltage AC 220V single-phase 50HZ
- Ток 16А
- Власть: 3.5кВт