- Опис
- Упит
Опис
Карактеристике:
- High stability and precision
- With built-in thermalprinter
- Direct calibrate on HL,ХРЦ,HB, and freelyswitch to 8 different hardness scales
- Automaticallyidentify 7 types of Impact devices for special application
- Test at any angleand direction, even upside down
- Conversion to tensile strength (U.T.S)
- PC Software for data transmission, analysis and measurement reports printing
Measuring Materials:
- Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, бакар (bronze), forged steel.
Техничка спецификација
Модел | Лeeb160 |
Measuring Range | (170-960)HLD,(17.9-69.5)ХРЦ,(19-683)HB,(80-1042)ХВ, (30.6-102.6)HS, (59.1-88)ХРА, (13.5-101.7)ХРБ |
Hardness parameter | HL, ХРЦ,ХРБ, HS,HB,ХВ,HRV,HSD |
Прецизност | ±6HLD/ ±1.5HRC |
Display | LCD with back-light |
Меморија | 600 групе |
PC Connection | Available |
Штампач | Build-in High-speed Thermal Printer, Width for printer paper:44.5±0.5mm |
Battery type | Rechargeable Li-ion battery |
Радна температура | -20℃~+60℃ |
Димензије | 230×86×46mm |
Impact Device Type | Д,DC,DL,D+15,G,Ц,E |
Тежина | 450г |
Standard Delivery | Главна јединица,Impact Device type D,Operation manual,Адаптер за напајање,Small supporting ring,Cleaning brush,Потврда,Калибрациони блок,paper of Printer. |
опциони прибор | Impact DC,D+15,DL,G,Ц,E、Shaped support ring、Paper for printer |