LR-F022-D Zero Drop Tester
- Опис
- Упит
Опис
Product overview
The zero drop test machine is mainly used to examine the impact degree of drop impact on package during actual transportation and loading and unloading, and to evaluate the reasonableness of the impact strength and package design in the process of handling.
The zero drop test machine is mainly used for larger package drop test.The machine is equipped with an “E” fork that can move down rapidly as the test piece bracket, and the test products are balanced according to the test requirements (surface, edge, Angle test).Током теста, the supporting arm moves down at high speed, and the test product drops to the bottom plate rubber with the “E” fork. Under the action of efficient shock absorber, it is embedded on the bottom plate.Theoretically, the zero drop test machine can make a drop test from zero height range. The drop height is set by the LCD controller, and the drop test is performed automatically according to the set height.
Control principle: adopt computer to import electrical reasonable design, complete free fall body, edge, Угао, face whole aspect design.
Применљив стандард: GB/ t1019-2008
Техничка спецификација
Sample max weight | 0—200Kg |
Drop height | 0—1500 mm |
Max sample size | 1600×1100×1000mm |
Impact floor size | 1800 × 1600mm |
Impact bottom | 1. One piece: 30mm thick, flat: the height difference of any two points on the impact surface shall not exceed 1mm; 2. Hard: the static load deformation of any 100mm2 area on the impact surface shall not exceed 0.1mm |
Sample hoisting speed | <20s/m |
The arm drops the terminal velocity | 1m height, terminal velocity >4.42m/s |
Support arm size | 1000 × 1000 × 30mm |
Test side | Face, edge, Угао |
Снага | 380V/50HZ |
Drive way | Motor drive |
Protection device | The upper and lower protective devices are provided with induction type protection |
Impact sheet material | 45# Steel,Solid steel plate |
Height shows | Touch screen control |
Drop height | Touch screen control |
The structure of the bracket arm | 45# Steel is made by welding |
Drive way | Straight sliding block and copper guide sleeve imported from Taiwan,45#Chrome steel |
Accelerating device | pneumatic |
Drop way | pneumatic |
Тежина | About 1500KG |
Rate of power | 5КВ |