LR-G006 เครื่องทดสอบการครอบแก้วอัตโนมัติ ISO 1520
- คำอธิบาย
- สอบถามรายละเอียดเพิ่มเติม
คำอธิบาย
LR-G006 เครื่องทดสอบการครอบแก้วอัตโนมัติ ISO 1520
Single coating and coating used in the detection of the extension of the coatings on metal substrate and damage.
– motor drive the punch has a very high reproducibility
– no zero steel plate, automatic zero after test, no accumulated error
– position sensor with high precision, sag precision can reach 0.01 มม
– the attached standard 10 times with lamp magnifying glass, convenient observation and judgment test results
– the largest measured 1.25 mm thick plates
– จอแสดงผลดิจิตอล, all functions are controlled by two buttons
ขั้นตอน
Insert plates instrument openings, besmear level up
The power of the medium using the clamping device clamp plate
Start the cup drawing instrument, and through a magnifying glass observation test plate surface
At a constant speed is 0.2 mm/s automatic ball on top
Observed the first crack, immediately stop cup drawing instrument
Digital display screen read cup drawing depth values
At least three times of a test plate test
LR-G006 เครื่องทดสอบการครอบแก้วอัตโนมัติ ISO 1520
เป็นไปตามมาตรฐาน
กิกะไบต์/ที 9753-2007 color paints and varnishes – cup drawing test
ไอเอสโอ 1520-2006
LR-G006 เครื่องทดสอบการครอบแก้วอัตโนมัติ ISO 1520
พารามิเตอร์ทางเทคนิค
input voltage | 220แรงดันไฟฟ้ากระแสสลับ 50Hz |
circular punch | เส้นผ่านศูนย์กลาง 20 มม |
sag depth | Max depth15 mm |
The depth of the precision | Division value0.01 mm |
มิติ | 230×360×430 mm |
น้ำหนัก | 35 กิโลกรัม |