- 描述
- 询问
描述
Product use:
This machine is specially used to test the damage of product package to fall and evaluate the applicable standard of impact strength during transportation and transportation: ISO2248 jisz0202-87 GB/ t4857.5-92
Machine features:
Single arm drop tester can perform free drop test on the surface, Angle and edge of the package, equipped with digital height indicator and decoder for height tracking, so that the product drop height can be accurately given, and the error with the preset drop height should not exceed 2% or 10MM.The machine adopts single arm and double column structure, with electric reset, electric drop control and electric lift device.The unique buffering device greatly improves the service life, stability and safety of the machine.Single arm setting, easy to place product.
主要技术参数:
- Drop height mm: 300-1500 可调节的
- Maximum weight of specimens: 0-80公斤;
- Base thickness: 10毫米 (solid iron plate)
- Maximum size of specimen mm: 800 X 800 X 1000
- Impact panel size mm: 1700 X 1200
- Drop height error: + / – 10毫米
- Appearance and size of the test bench mm: 关于 1700 X 1200 X 2315
- Net weight kg: about 300kg;
- 测试方法: 表面, Angle and edge drop in all directions
- 控制方式: electric
- Fall height error: 1%
- Parallel error of hitting panel: less than or equal to 1 程度
- Error of Angle between falling surface and level during falling: 不多于 1 程度
- 电源: 380V1; 电源: AC380V 50HZ
- 力量: 1.85KWA
Machine studio environment requirements
28 ℃ temperature: 5 ℃~ + [1] average temperature 28 ℃ or less (24 小时)
相对湿度: less than 85%RH
Power supply conditions three-phase four-wire + protection ground line,
Voltage range: 交流电 (380 + / 38) V
