- 描述
- 询问
描述
LR-G026 拉脱附着力测试仪
磷产品 Description
The adhesion of the coating with the substrate can be quantified by the use of the open method, which means that the external force of the coating from the substrate to a specific area is required to be expressed by Mpa.
The pull-type adhesion meter conforms to the standard requirements of GB/T 5210, 国际标准化组织 4624 and ASTM D 4541.Its measuring principle is as follows: first round forging die by glue and adhesive coating on the surface under test, after a period of maintenance, through measuring instrument installed inside a spring places a lift to the circular forging die.When the circular forging die is pulled off the surface of the coating, the indicator on the scale shows the value of the adhesion of the coating to the substrate.
The instrument is operated by hand and is mainly used for construction site determination, especially in engineering acceptance.The application range includes the detection of deck coatings or spraying, 不锈钢, aluminum products or coatings on concrete.
LR-G026 拉脱附着力测试仪
主要技术参数
| 材料 | Anodized aluminum fuselage, steel base |
| 标准配置 | Pull-type adhesion tester, die (20), Araldite 1 box, pedestal support ring, magnetic forging die clip, forging die cutter, ratchet wrench (limited to range 3&4), suitcase and operation manual |
Order Information
NO-1 Measure Range：0-3.5兆帕
NO-2 Measure Range：0-7.0兆帕
NO-3 Measure Range：0-15兆帕
NO-4 Measure Range：0-22兆帕
NO-5 Measure Range：0-0.2兆帕
NO-6 Meausre Range：0-3.5Mpa （The concrete is specially coated with the forging die with a diameter of 50mm）
