المعنى والغرض
4.1 يمكن أن يؤدي الغمر في الماء إلى تدهور الطلاء. Understanding how a coating resists water immersion can help predict its service life. A water immersion test failure can be caused by a variety of factors, including defects in the coating itself, contamination of the substrate, or inadequate surface treatment. لذلك, the test can be used to evaluate individual coatings or complete coating systems.

4.2 Water immersion testing is used for coating and substrate treatment research and development, specification acceptance, and quality control in manufacturing. These tests typically lead to a determination of pass or failure, but can also measure the extent of failure. If there is no evidence of water-related failure after a specified time period, the coating system is considered to have passed.

4.3 Until the quantitative relevance of the coating or coating system is determined, the results obtained from water immersion tests performed in accordance with this protocol should not be expressed as equivalent to a period of exposure to water in the natural environment.

أستم د 870-2020 تحديد مقاومة الماء للطلاءات بطريقة الغمر

4.4 In water immersion testing, it is impractical to perform corrosion tests on scribe coatings on ferrous metal substrates because corrosion products tend to contaminate the water bath. It is sometimes necessary to test the continuous overflow of the tank to maintain consistent water quality.

4.5 The equipment used for testing is relatively inexpensive and can be as simple as a glass beaker with a stirrer. Very large tanks can also be used to test coated tubes or other large coated products.

نطاق
1.1 The practice covers the fundamentals and operating procedures for testing the water resistance of a coating by immersing part or all of the coated specimen in distilled or softened water at room temperature or high temperature. Although immersion tests can be performed using solutions of various materials in water, the practice is limited to testing only in water.

1.2 This practice is limited to methods of obtaining, measuring and controlling the conditions and procedures of the immersion test. It does not specify sample preparation, specific test conditions, or evaluation of results.

ملحوظة 1: Alternative practices for testing paint for water resistance include D1735, D2247 and D4585.

أستم د 870-2020 تحديد مقاومة الماء للطلاءات بطريقة الغمر

1.3 تعتبر القيم المعبر عنها بوحدات النظام الدولي (SI) بمثابة معايير. القيم الواردة بين قوسين هي للإشارة فقط.

1.4 ليس المقصود من هذا المعيار معالجة جميع قضايا السلامة, لو اي, المرتبطة باستخدامه. تقع على عاتق مستخدم هذه المواصفة القياسية مسؤولية تحديد السلامة المناسبة, الممارسات الصحية والبيئية وتحديد إمكانية تطبيق القيود التنظيمية قبل الاستخدام.

1.5 تم تطوير هذه المواصفة القياسية الدولية وفقًا لمبادئ التقييس المعترف بها دوليًا المنصوص عليها في القرار الخاص بمبادئ تطوير المعايير الدولية, المبادئ التوجيهية والتوصيات الصادرة عن لجنة الحواجز الفنية أمام التجارة التابعة لمنظمة التجارة العالمية.