عندما لا تكون غرفة اختبار درجة الحرارة والرطوبة الثابتة قيد الاستخدام, the following measures should be taken for maintenance:

Clean the box: Use clean wipes or paper towels to wipe the inside and outside of the box, especially the door sealing rubber pads and heaters, to ensure that the box is dry and clean.

Power off: When the test chamber is not in use, the power should be turned off to avoid waste of energy and prolong the life of the equipment.

كيفية الحفاظ على صندوق اختبار درجة الحرارة والرطوبة ثابتًا عند عدم الاستخدام?

Regular calibration: In order to ensure the accuracy of temperature and humidity of the test chamber, it is necessary to carry out regular calibration. During the time when the test chamber is not in use, the temperature and humidity sensor of the test chamber can be sent to the relevant manufacturer or third party laboratory regularly for calibration.

Maintain ventilation: When the test chamber is not in use, the door of the test chamber can be opened and ventilated to reduce the retention of moist air in the chamber.

Regular inspection: During the time when the test box is not in use, the state of the box should be checked regularly, including whether the sealing rubber pad is aging, whether the heater is damaged, إلخ., to ensure that the equipment can work normally when it is used next time.

كيفية الحفاظ على صندوق اختبار درجة الحرارة والرطوبة ثابتًا عند عدم الاستخدام?

The above are some basic methods of maintaining constant temperature and humidity test box. If the frequency of use is low, attention should also be paid to preheat the box before use to ensure the performance and accuracy of the equipment.