ISO1133, ASTM D1238 أداة اختبار معدل التدفق الذائب
- وصف
- سؤال
وصف
ISO1133, ASTM D1238 Melt Flow Rate Test Instrument Test Standard:
GB/T3682-2000,ISO1133-97, أستم D1238
Discription:
ISO1133, ASTM D1238 أداة اختبار معدل التدفق الذائب use for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, البلاستيك الفلور, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.
شخصية المنتج:
1.English LCD Touched Screen.
2.Hand automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
5.Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
Test Methods:MFR Methods
Display Mode:English color touch screen display
تخصيص
نموذج | LR-A001-A |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Outlet length | 8.000±0.025mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
نطاق درجة حرارة | Room Temperature~450degree centigrade |
Temperature fluctuation | ±0.2 ℃ |
توحيد درجة الحرارة | ±1 درجة مئوية |
دقة عرض درجة الحرارة | 0.1درجه مئوية |
Display resolution | 0.1درجه مئوية |
Maximum comsuption | < 600دبليو |
Time display resolution | 0.1س |
Weight parameters are as follows: | |
Weight accuracy | ±0.5% |
التكوين الأساسي
| A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Position detection | |
Loop distance from up and down | 30مم |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 دقيقة. |
Material be installed | 1 دقيقة. |
Material sample temperature recovery time | 4 دقيقة. |
When binder set | 1دقيقة |
Output mode | Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
Test load | Eight sets of weights |
قوة | AC220V±10% 50/60HZ |
Accessories List
لا | اسم | الكمية | ملاحظة |
1 | وزن | 1 تعيين | 0.325㎏、0.875㎏、1.835㎏、2.5㎏、2.915㎏、3.475㎏、4.615كلغ、5.0k g |
2 | Weight tray | 1جهاز كمبيوتر شخصى | Within level 1 حمولة |
3 | Charging hopper | 1جهاز كمبيوتر شخصى | |
4 | Mouth mold cleaning rod | 1جهاز كمبيوتر شخصى | |
5 | Charging bar | 1جهاز كمبيوتر شخصى | |
6 | Cylinder cleaning rod | 1جهاز كمبيوتر شخصى | |
7 | piston rod | 1جهاز كمبيوتر شخصى | |
8 | mouth mold | 1جهاز كمبيوتر شخصى | |
9 | gauze | 2roll | |
10 | طباعة الورق | 2 roll |
Standard test force(8 level)
1 مستوى:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)
=3.187N
2 مستوى:1.200 kg=(0.325+No2 0.875 وزن)=11.77 N
3 مستوى:2.160 kg=(0.325+No3 1.835 وزن)=21.18 N
4 مستوى:3.800 kg=(0.325+No4 3.475Weight)=37.26 N
5 مستوى:5.000 kg=(0.325+No.5 4.675Weight)=49.03 N
6 مستوى:10.000 kg=(0.325+No.5 4.675weight+No.6 5.000Weight)=98.07 N
7 مستوى:12.000 kg=(0.325+No.5 4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
8 مستوى:21.600 kg=(0.325+No.2 0.875weight+No3. 1.835+No.4
3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N