جهاز اختبار التآكل تابر LR-A013
Taber abrasion tester is used to do the test of wear-resistant in surface, جلد, قماش, طلاء, ورق, flooring, الخشب الرقائقي, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
- وصف
- سؤال
وصف
جهاز اختبار التآكل تابر
الاستخدامات
This machine is used to do the test of wear-resistant in surface, جلد, قماش, طلاء, ورق, flooring, الخشب الرقائقي, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
قواعد الامتحان:ASTM D4060/D4157/D1044, JIS K5400/K7024, CNS 8540, BS EN 660-2
جهاز اختبار التآكل تابر
تحديد
Specimen dimension | φ110mm φ6mm |
Grinding wheel | φ2″(MAX .45mm)1/2″(دبليو) |
Center space of wheel | 63.5مم |
Distance between wheel and test plate | 37~38mm |
السرعة الدورانية | 60دورة في الدقيقة |
Load | 250ز,500ز,750ز,1000ز |
الموقت | شاشات الكريستال السائل,0~999999 |
Distance between sample and dust collector | 3مم |
البعد | 53×32×31cm
|
وزن | 18كلغ, Excluding dust collector |
قوة | 1∮,تيار متردد 220 فولت,50هرتز |