Ultrasonic Flaw Detector Leeb500
- وصف
- سؤال
وصف
Ultrasonic Flaw Detector Leeb500
Featureس
- Probe automatic calibration
- DAC and AVG are automatically formed, and can be corrected and compensated
- Freelyswitch to fourkinds of standards (depth D, level P, distance S, amplitude H)
- Automatically calculate the φ value equivalent defects
- تخزين: 980 pieces of A-scan imagesand data
- The width and intensity of launch pulse are adjustable;
- With the durableshell,oil-proof, water-proof and dust-proof;
- PC software is availablefor data analysis, managementand reports printing
- مزود الطاقة: rechargeable Li-ion battery, standby time more than 15hours
Ultrasonic Flaw Detector Leeb500
طلب
Application for quickly and accurately detection, positioning, evaluation and diagnosis of various flaws in the work-piece, such as cracks, welds, blowhole, إلخ. It Widely used in electric power, البتروكيماويات, boiler and pressure vessel, فُولاَذ, military, الفضاء الجوي, railway transportation, سيارات, الات, and other fields.
Ultrasonic Flaw Detector Leeb500
المواصفات الفنية
| نموذج | Leeb500 |
| Operating Frequency | 0.5MHz～15MHz |
| Scanning Range | 0-6000مم |
| Vertical linearity error | ≤4% |
| Horizontal linearity error | ≤0.1% |
| Dynamic Range | ≥32dB |
| Noise Level | ＜8% |
| Velocity Range | 1000～9999（m/s） |
| Testing Sensitivity | ≥60dB (Depth 200mm, Φ2 flat bottom hole) |
| Gain Range | 0~110dB |
| Standard Probes | Straight probe: 2.5ميغاهيرتز, diameter 20mm, cable Q9-Q9 Angle probe: 4ميغاهيرتز, 60 درجة, 8*9 مم, cable Q9-C5 |
| Standby Time | ≥ 10 hours of continuous work |
| درجة حرارة | (- 20 ~ 70) درجه مئوية |
| رطوبة | (20 ~ 95)% ر.س |
| البعد الشامل | 240×160×40mm |
| وزن | 1.2كلغ |
| التسليم القياسية | Main Unit、Straight probe、Angle probe、محول الطاقة、BNC cables、PC software, يدوي,Certificate, Warranty card |
| الملحقات الاختيارية | Optional probes, Cables, Calibration blocks, Coupling agent |
