ASTM D1148-2018Rubber DeteriorationTest Method for Fading of Light Colored Surfaces by Heat and Ultraviolet Light

Význam a použití
4.1 White or light colored vulcanized rubber products or surfaces covered with organic finishes may discolor when exposed to wet, humid, high temperature and sunlight conditions. This change in the color of the light-colored rubber surface repels consumers.

4.2 The results obtained should only be considered as indicative of the effect of irradiance from the specified source (UVA-340 lamp or xenon arc with daylight filter) and not equivalent to the result of any natural exposure, unless the degree of quantitative correlation of the relevant material has been established empirically.

4.3 The test method can be used for producer-consumer acceptance, adjudicative purposes and research and development work.

Poloměr
1.1 This test method covers techniques for evaluating surface discoloration of white or light-colored vulcanized rubber that may occur when subjected to UV or UV/visible light exposure from specified sources under controlled conditions of relative humidity, humidity and temperature.

ASTM D1148-2018Rubber DeteriorationTest Method for Fading of Light Colored Surfaces by Heat and Ultraviolet Light

1.2 The test method also describes how to qualitatively assess the degree of discoloration produced in this case.

1.3 The termdiscolorationapplies to a change in color of a rubber sample, as distinct from staining (see note 1), which refers to a change in color of a metal surface treated in contact with or adjacent to a rubber sample.

Poznámka 1: The dye test is covered by test method D925.

1.4 Hodnoty vyjádřené v jednotkách SI se považují za standardní. Hodnoty uvedené v závorkách jsou pouze orientační.

1.5 Tato norma není určena k řešení všech bezpečnostních problémů, jestli nějaký, spojené s jeho užíváním. Je odpovědností uživatelů této normy zajistit odpovídající bezpečnost, zdravotní a environmentální postupy a určit použitelnost regulačních omezení před použitím.

1.6 Tato mezinárodní norma je založena na mezinárodně uznávaných zásadách normalizace stanovených v Rozhodnutí o zásadách pro vývoj mezinárodních norem, Směrnice a doporučení vydané Výborem pro technické překážky obchodu Světové obchodní organizace.

Sdílet tento příspěvek