Význam a použití
5.1 The information provided by this test method can be used for material specifications for product design and quality assurance applications. Can be used to compare different products.

5.2 The use of the test method must be related to the test purpose. One purpose is to determine the relative strength of the tape at the time of purchase or use. Another aim is to identify or characterize a specific backing material.

5.2.1 The test may be performed on the received tape, tj. the material is not cut into a sample width less than the received width. Obvykle, tapes wider than 48 mm [2 v] are not tested, mainly due to equipment limitations. Tape that is about 3 mm [0.125 v] narrow can be tested.

5.2.2 Tests may be performed on samples cut within the boundaries of the sample material using a sharp razor, such as the blade defined in Section 6. This method is commonly used for material characterization, determining consistent quality, and conforming to specifications.

5.3 Elongation at break or tensile properties up to a specified elongation may be related to the intended use of the tape or to its use in identifying or characterizing the material.

ASTM D3759/D3759M-2019 “Standard Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape”

Krok 1: Rozsah
1.1 This test method covers the measurement of the breaking tensile strength (breaking strength) and tensile properties (prodloužení) of pressure-sensitive tapes and labels. It includes programs for machine orientation and transversal, high strength filament reinforced backing and high elastic backing. It also includes the process of obtaining the force (” F “hodnota) of the specified elongation. These programs use a constant rate of expansion (CRE) type test machine.

1.2 Values expressed in SI units or inch-pound units shall be regarded as standard values respectively. Hodnoty uvedené v každém systému nemusí být úplně stejné; The conversion between measurement systems needs to be done carefully.

1.3 Tato norma není určena k řešení všech bezpečnostních problémů spojených s jejím používáním. Je odpovědností uživatelů této normy zajistit odpovídající bezpečnost, zdravotní a environmentální specifikace a určit použitelnost regulačních omezení před použitím.

1.4 Tato mezinárodní norma je založena na mezinárodně uznávaných zásadách normalizace stanovených v Rozhodnutí o zásadách pro vývoj mezinárodních norem, Směrnice a doporučení vydané WTO pro technické překážky obchodu (TBT) Výbor.

ASTM D3759/D3759M-2019 “Standard Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape”

2. Viz soubor
AFERA document (European Manufacturers Association, European Adhesives Association, Evropa

AFERA 4004 Measurement of the breaking strength of self-adhesive tape

AFERA 4005 Self-adhesive tape elongation measurement

PSTC Paper (Pressure Sensitive Tape Committee)

Tensile strength and elongation of PSTC 131 pressure sensitive tape

European Specification (V) document

V 1940 Measurement of the breaking strength of self-adhesive tape

V 1941 Measurement of elongation at break of self-adhesive tape

standard ASTM

D828 Test method for tensile properties of paper and paperboard using constant elongation equipment

D882 Test method for tensile properties of plastic sheet

D996 Ekologické podmínky balení a distribuce

D3715 / Postup zajištění kvality pásky D3715M citlivé na tlak

D4332 Practice of regulating containers, packaging or packaging components for testing

E4 testing machine force verification convention

E122 Practice of calculating sample sizes to estimate average values of batch or process features with specified precision