Zkušenosti ke sdílení Metoda kalibrace stroje na testování opotřebení TABER Rychlý pohled

TABER abrasion testing machine is suitable for leather, tkanina, papír, malovat, překližka, kůže, podlahová dlaždice, sklenka, natural plastic and so on. The test method is that a pair of grinding wheels are mounted on the rotating sample, and the specified load is applied. When the sample rotates, the grinding wheel is driven, so as to wear the sample, and the weight loss is the weight difference before and after the test. The abrasion tester produced by Taber is the...

Deset minut na přečtení provozních metod a principů zkušebních strojů na testování opotřebení podle DIN

Stroj na testování opotřebení DIN je důležitým ukazatelem opotřebení mnoha pryžových výrobků. Widely used in rubber tires, chariot tracks, soles and other rubber products with wear resistance as the main performance of the physical property test, s vysokou účinností, dobrá reprodukovatelnost a snadné provozní vlastnosti, is to assist the industry to control the quality of the product state of the weapon. Tensile: maximum force, pevnost v tahu, elongation at break, modul pružnosti, atd. Bending resistance: maximum strength,...

Tyto malé detaily používání strojů na testování opotřebení TABER nelze ignorovat

Stroj na testování opotřebení TABER je vhodný pro tkaniny, papír, malovat, překližka, kůže, podlahová dlaždice, sklenka, přírodní plast, atd. The test method is a pair of grinding wheel on the rotating test material, and the specified load, the test material rotates to drive the grinding wheel, for the wear test material, the wear loss weight is the weight difference before and after the test. Generally used to test leather products, the test specimen is rotated on a horizontal platform, two...

Před nákupem křivky zatížení se podívejte na tyto výhody

Křivka posunu zatížení je vhodná pro test elastického posunu velkých spínacích klíčů, and can be applied to the pipeline signal trigger test to send out good and bad product signals to achieve the purpose of quick detection of OK and NG products. The measurement curves are memorized by the computer and can be enlarged or reduced at any time. N curves can be placed arbitrarily on an A4 paper. The computer directly prints and stores load-travel...

Co je test funkce únavového testu při stlačení houby?

The sponge compression fatigue testing machine is used to test the fatigue characteristics, fatigue life, prefabrication crack and crack propagation of metal, alloy material and its components, operating joints, solid joints and spiral moving parts under tensile, compression or tension and pressure alternating load at room temperature. The sponge compression fatigue testing machine is mainly used to test the fatigue properties of metal and its alloy materials under tensile, compression or tensile and compressive alternating loads at room temperature. To...

Ocelový stroj na zkoušení tlaku v tahu FAQ

Stroj na testování pevnosti oceli je jedním z široce používaných zařízení pro studium mechanické pevnosti materiálů, which needs to use constant speed motion. According to the different load measurement methods, the early can be divided into two categories of pendulum tensile testing machine and electronic tensile testing machine, the current pendulum tensile testing machine market is now rarely used, mainly the accuracy can not meet the current standard requirements. The tensile test is usually to clamp the two...

Tento článek představuje novou testovací metodu stroje pro testování odrazu padajícího koule houby

Stroj na testování odrazu koule houby je navržen a vyroben podle GB/T6670-97, ISO8307 a ASTMD3574. It is suitable for determining the falling ball resilience of soft polyurethane foams. Sponge falling ball rebound testing machine Test method: 1. Start testing immediately after state adjustment. 2. Place the sample on the test plane to ensure that the sample is in a naturally relaxed state, adjust the height of the test platform, and adjust the descending height of the bottom of the steel...

Jsou představeny vlastnosti skládacího zkušebního stroje FPC

FPC skládací tester lze předem nastavit na počet ohybů přes počítadlo, once the bending number reaches the corresponding value, the machine will stop running, so that the shoes can be checked. The moving part of the machine is covered by a hinged protective cover, which is equipped with safety devices to prevent outside contact while the machine is still in operation. The machine is robust and the required components are made of corrosion-resistant materials. The FPC folding tester...