Průmyslový sušicí box je druh zařízení pro sušení, vytvrzování, drying and other operations of large quantities of materials. It usually has a large studio volume and a high power heating system that can quickly and evenly transfer heat to the surface of the material for fast and efficient drying and handling.

Common problems and solutions
1, the temperature control is unstable

Řešení: Zkontrolujte pracovní stav regulátoru teploty a polohu senzoru a zjistěte, zda není regulátor nebo senzor vadný nebo je třeba jej vyměnit. Problém lze vyřešit výměnou nebo opravou příslušných dílů, nebo přenastavení parametrů regulace teploty.

2, the temperature is too high or too low

Řešení: Check whether the heating power of the device meets the requirements and whether the heating component is faulty or needs to be replaced. You can adjust the heating power and temperature of the device, or replace the heating components as required.

3. Nerovnoměrné vytápění

Řešení: Check the working status and position of the heater to see if the position and heating time of the heater need to be re-adjusted so that the items in the equipment can be evenly heated.

4, overload or overheating protection triggered

Řešení: Check whether the power supply voltage and ground cable of the device are normal, and find whether the heater or blower is faulty or needs to be replaced. The problem can be resolved by replacing or repairing the relevant parts, or repositioning the equipment.

5. Excessive noise

Řešení: If the device makes too much noise, check whether the power voltage and ground cable of the device are normal, and find whether the heater or blower is faulty or needs to be replaced. The problem can be resolved by replacing or repairing the relevant parts, or repositioning the equipment.

The North and south tides remind you: industrial drying chambers need to be calibrated and maintained regularly. Ve stejnou dobu, it is necessary to regularly clean the inside of the equipment, check the performance and condition of the heater, controller, sensor and other equipment, and timely replace or repair the faulty parts. Navíc, it is recommended to maintain the device according to the operation manual and maintenance guidance provided by the manufacturer to ensure long-term stable operation of the device.

Běžné problémy průmyslové sušárny a konkrétní řešení

Záležitosti vyžadující pozornost
In the process of using industrial drying chambers, you also need to pay attention to the following points:

Arrange the position of the sample to ensure that the sample can be evenly heated and distributed.

Do not accumulate too much debris or samples inside the equipment, avoid

Equipment is overloaded or overheated, resulting in equipment damage or inaccurate test results. 3. Before using the equipment, it is necessary to preheat the equipment to ensure that the equipment can reach the required temperature.

According to the actual needs, the heating power and accuracy of the industrial drying oven are reasonably selected to avoid inaccurate test data due to equipment parameter mismatch.

In the process of using the equipment, the heating changes and test data are recorded in time, and analyzed and processed according to needs.

Ve zkratce, the industrial drying oven is a commonly used drying equipment, and it is necessary to pay attention to the use and maintenance of the equipment during use to ensure the stability of the equipment and the accuracy of the test data. Ve stejnou dobu, it is necessary to follow the manufacturer’s instructions and maintenance instructions, and perform regular maintenance to ensure long-term reliable operation of the equipment.