Charpy Impact Tester LR-A003
This impact tester is used to test impact toughness of hard plastic,GFPA,plasty vyztužené skleněnými vlákny,keramika, litý kámen,electrical insulating materialand other non-metal material.It’s a ideal testing equipments in chemical industry,R&D instituce,kontrola kvality odd.
- Popis
- Poptávka
Popis
Charpy Impact Tester LR-A003
Použití:
Digital charpy impact testing machine is mainly used in hard plastic, reinforced nylon, glass fiber reinforced plastic, keramický, litý kámen, electrical insulating materials of nonmetal materials to the determination of impact toughness.Is the chemical industry, scientific research units, colleges and universities, quality inspection departments such as the ideal test equipment.
Charpy Impact Tester LR-A003
Charakter:
1,Intelligent controller has high precision, a je vybaven LCD displejem, může být intuitivní, přesné čtené údaje
2,Domestic first using carbon fiber beam (požádal o patent), the impact on the direction, improve the rigidity of materials, and will impact the quality of concentrated in the largest pendulum on the center of mass of truly no vibration impact test, and increase the service life.
3,Imported high resolution digital encoder, Přesnost úhlového testu je vyšší a stabilnější
4,Aerodynamic impact hammer and imported ball bearing, greatly reduced the mechanical friction loss
5,Automatically calculate the final result, testovací data mohou být uložena a zprůměrována 12 skupiny dat
6,můžete si vybrat čínské a anglické provozní rozhraní, výsledky testu lze zvolit J/m, KJ / ㎡, kg – cm/cm, ft – ib/in atd
7,Built-in miniature printer test data.
Testovací standard:
ISO179-2000 “plasty – determination of impact strength of the simply supported beam with hard material,
GB/T1043-2008 “the hard plastic beam impact test method”
JB/T8762-1998 plastic beam impact testing machine,
the GB/T 18743-18743 “with thermoplastic fluid conveying pipe beam impact test method” (applicable to pipe)
Charpy Impact Tester LR-A003
Specifikace
rychlost nárazu | 2.9 nebo 3.8 slečna |
Pendulum to sample center distance | 221mm、380mm |
Šikmé kyvadlo | 150 ° |
Jaw bearing spacing distance | 40mm、60mm、70mm、95mm |
Supporting the blade radius | R=1mm |
Impact of the blade Angle | 30° |
Impact the blade radius | R=2mm±0.5mm |
Vnější velikost | 560(Délka) * 300 (Šířka) * 840 (Výška) mm |
Hmotnost | 135kg |
Výběr specifikací
Modelka | LR-A003-5D | LR-A003-15D | LR-A003-50D | |
energii kyvadla | 1J、2J、4J、5J | 7.5J、15J | 25J、50J | |
Předeleva kyvadla | 150° | |||
Impact speed | 2.9SLEČNA | 3.8SLEČNA |