Popis

LR-B004-A Průmyslová trouba

Použití

This machine can provide a stable test space for pre-heating, sušení, changes about physics and chemistry testing . It supplys precision temperature controllter with high stability of platinum resistance to temperature that makes temperature well-distribution.

LR-B004-A Průmyslová trouba

Structure And Size

1. Vnitřní velikost: 450(šířka) X 400(depth) X 400(výška)mm
2. Vnější velikost: 720(wide) X 580(deep) X 990(high)mm+110mm trundle, subject to the real object;
3. Operation panel: the control panel is above the machine (as shown);
4. Opening method: single door opens from right to left;
5. Viewable window: visible window on the door: Specifikace: W200*H250mm;
6. Vnitřní materiál je: 430# mirror plate, 1.0mm tlustý;
7. The outer material is: ocelový plech válcovaný za studena, 1.0mm tlustý.
8. Interlayer: there are two inner layers, and two meshes;
9. Tepelně izolační materiál: glass fiber rock wool, with good thermal insulation effect;
10. Těsnicí materiál: high-temperature foamed silica gel bar;
11. Install brake movable casters on the machine;
12. The overall structure is floor-type.

LR-B004-A Průmyslová trouba

Regulace teploty system

1. The temperature control instrument is PID digital display instrument (taichung instrument in Taiwan), single-point temperature control, které lze automaticky vypočítat, PV/SV simultaneously displayed, button setting;
2. Timer setting: z 1 second to 9999 hodin (optional setting hours, minutes and seconds) when the temperature reaches time, when the heating current is stopped, and an alarm is prompted at the same time;
3. Teplotní čára (K) typ;
4. Signal output is 3-32v;
5. The heating controller is: solid relay SSR without contact;
6. Heating material: heat resistant tube;

7, teplotní rozsah: 50 ~ 300 ℃ adjustable, commonly used temperature within 260℃;

8, rychlost teploty: 100 ℃ about 15 minut

9, the control precision, ± 0.5 ℃;

10, display precision: 0.1 ℃

11, temperature deviation: 50-200 ℃ ±2.0 ℃, 201-300 ℃±3.0 ℃. (no-load test)

Systém přívodu vzduchu

1. Air supply mode: internal horizontal hot air circulation;
2. The motor is temperature-resistant special type, with motor power of 370W/220V;
3. The fan is 7.5-inch multi-wing turbine type;
4. The air inlet is on the right side of the machine and the air outlet is on the left side of the machine.

Napájení Supply Device

1. Voltage AC 220V single-phase 50HZ
2. Current 16A
3. Napájení: 3.5kw