UV povlak je druh povlaku založený na technologii ultrafialového fotovytvrzování, by adding ultraviolet sensitizers and photoinitiators to the coating, so that it can cure quickly under ultraviolet irradiation. UV coating has the advantages of fast curing, high efficiency, vysoká tvrdost, high transparency, high gloss, ochrana životního prostředí, atd., widely used in electronics, automotive, tisk, plastics and other fields.

On line rod coater, for UV coating, the recommended use of stainless steel wire rod, because stainless steel material has good corrosion resistance and thermal stability, can withstand UV exposure to high temperatures and high energy.

Drátěný lakovač se používá k přípravě UV lakovacích filmů

The steps to prepare UV coating films using a wire rod coater are as follows:

Prepare UV paint solution: Mix UV paint with solvent and stir well.

Prepare the substrate: Select the appropriate substrate material, and perform surface cleaning and pretreatment.

Povlak: Use a wire coater to evenly coat the UV coating solution on the substrate surface.

Ultraviolet irradiation: put the coated sample under the ultraviolet irradiation for a certain time, so that the UV coating quickly solidifies.

Konečně, the electrode preparation and testing and other subsequent steps are carried out.

It should be noted that in the coating process, the coating speed, teplota, pressure and other parameters of the line bar should be adjusted according to the characteristics of the coating and the parameters of the coater, in order to obtain high quality UV coating film. When UV irradiation, the irradiation time should be adjusted according to the thickness of the coating and the power of the UV irradiator to ensure that the coating is fully cured.