Beschreibung

7006-28A-1 E27-Schraubkappenmessgerät Stoppmessgerät

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Name der E27-Lampenfassung

Erfüllen Sie den Standard: IEC 60061; GB1483.1
Produktkategorie:
E27-Lampenfassungslehre Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27-Schraubsockel. Kontaktleistungsanzeige 7006-50-1
E27-Lampenfassung. Anti-Unfall-Kontaktanzeige (Anti-Stromschlag) 7006-51A-2
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge

ReferenceDimension/ dimension (mm)Tolerance/ tolerance (mm)
D26.05+0.0/-0.01
L16.5±0,1
U1+0.0/-0.1
V17.0+0.05/-0
W2±0,1
α Nom. Nominal value 45°
Weight/ mass0.15KG±10%

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Zweck:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Testen :

When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface “X”. Only the weight of the gauge itself shall be used in the test.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Zweck:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Zweck:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Testen :

When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface “X”. Only the weight of the gauge itself shall be used in the test.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Zweck:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 E27-Schraubkappenmessgerät Stoppmessgerät






    wurde Ihrem Warenkorb hinzugefügt:
    Kasse