Coating Thickness Gauge LT220
- Beschreibung
- Anfrage
Beschreibung
Coating Thickness Gauge LT220
Merkmale:
- Two measuring methods: magnetism induction(F) and eddy current(N). When F probe is equipped, it can measure the non-magnetic coatings on magnetism substrate, when N probe is equipped, it can measure the non-conduction coating on non-magnetism substrate
- 8 types of probes are available for various application:F1,F1/90,F3,F10,F400,N1,N3,N400
- Two measuring modes:continue/single
- Two working modes: direct mode(DITECT) and Batch mode(APPL)
- 5 statistic ways:Mean values/Max.values/Min.values/Testing numbers(No.)/Standard deviations(S.Dev)
- Two measuring calibration modes
- With backlight display
- 640 measured values can be stored
- Low battery indication
- 2 switch off modes: manual and auto
Coating Thickness Gauge LT220
Technische Spezifikation
| Messbereich | See table in next page |
| Probe available | |
| Toleranz | |
| Minimum resolution | |
| Measuring condition | |
| Betriebssprache | English/Chinese |
| Standards | AUS,ISO,ASTM,BS |
| Kalibrierung | Zero and foil calibration |
| Schnittstelle | USB |
| Statistic | Number of measurement, bedeuten, standard deviation, maximum and minimum |
| Data memory | 640 Lesungen |
| Limits | Adjustable with alarm |
| Stromversorgung | NiMH rechargable battery |
| Maße(mm) | 230×86×47 |
| Betriebsumgebung | Temperatur:0~40 |
| Feuchtigkeit:20%~90% | |
| No strong magnetic field |
Standard Lieferung
| NAME | NUMBER |
| Haupteinheit | 1 |
| Sonde(F1/N1) | 1 |
| Substrate | 5 |
| Calibration foil | 1 |
| Bedienungsanleitung | 1 |
| Kommunikationskabel | 1 |
| Dataview software | 1 |
