Beschreibung

LR-K003 PLC Nadelflammentester

The reference standard

IEC 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694.

Technische Spezifikationen

This product according to used in electronic, electrical products due to fault conditions, such as through the leak path of fault current, components or parts of overheating, such as bad contact also may cause fire, it may be shot into the nearby on the part of the test is simulation under fault conditions inside the product produced by the small flame, simulation technology is used to evaluate the fire risk.For small parts (or components) hot wire test or horizontal – vertical combustion test method is not suitable, can cite needle flame test method.If the sample is ignited during the hot wire test, a needle flame test is required for the combustion hazard.Suitable for electronic electrical products, household appliances, Komponenten, wie zum Beispiel: terminal, centrifugal switch, electric rice cooker socket.

LR-K003 PLC Nadelflammentester

Grundlegende Spezifikationen

1) Inhalt der Box: 0.5 Kubikmeter, mit Glasbeobachtungstür

2) fuel: butane gas

3) burner specification: mehr als 35 mm lang, inner Ø + / – 0.1 mm, 0.5 mm outside diameter less than 0.9 mm Ø

4) Flammenhöhe: 12mm + 1mm can be adjusted

5) flame temperature: 100 ℃ to 700 ℃ innerhalb 23.5 + / – 1 S

6) Timer: adjustable in the range of 0 ~ 99 Minuten und 99 Sekunden, the burning time can be set, and the burning duration can be recorded

7) Produktmerkmale: the combustion box and main mechanical parts of this test instrument are stainless steel, schönes Aussehen, smoke resistance and air corrosion.The time figures show that the jig can be adjusted in three dimensions, the control system is automated and the independent sniffle, and the observation record is convenient and reliable.With temperature measuring device.

8) Stromversorgung: AC220V / 50Hz