Tester für den Biegewiderstand ganzer Schuhsohlen
- Beschreibung
- Anfrage
Beschreibung
Whole Shoes Sole Flexing Resistance Tester is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. Während des Tests, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
Ii. Produktspezifikationen:
| Biegewinkel | 90° | Diameter of circular shaft | φ30mm |
| Bending speed | 0~135 RPM | Width of fixture | 144mm |
| Also try | 3 Sohlen | Count meter | LED, 0~99999999 |
| Ma Li | Gleichstrom, 375W | Volumen | 85×31×65cm |
| Gewicht | 68kg | Energiequelle | 1∮ AV220V, 3A |
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
ICH. Geltungsbereich:
The machine is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. Während des Tests, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
ICH. Geltungsbereich:
The machine is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. Während des Tests, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
