Diese Vorsichtsmaßnahmen für den Betrieb von DIN-Verschleißprüfmaschinen müssen beachtet werden

Die DIN-Verschleißprüfmaschine wird hauptsächlich für die Verschleißfestigkeitsprüfung von Schuhsohlen und Polymerplattenmaterialien eingesetzt. Bei der Drehung des Verschleißrades, Die Probe wird in einem bestimmten Grad mit Schleifpapier abgeschliffen, um Verschleiß zu erzeugen, um dessen Verschleißverhalten zu beurteilen, mit hoher Leistung. Gute Reproduzierbarkeit und einfache Bedienung. Im Prozess seiner Operation, Es gibt noch viele Orte, auf die man achten muss.

Vorsichtsmaßnahmen für den Betrieb der DIN-Verschleißprüfmaschine:
1, Das Reibtuch kann nicht wiederholt verwendet werden, Bei jedem Test muss ein Stück Reibungstuch ersetzt werden;
2, Wollfilz kann mehrfach verwendet werden, if the surface is worn or has been stained when it needs to be replaced, can be used on both sides;
3, the insole should be first cloth, and then Martindale wear test;
4, nach Abschluss der Prüfung, the surface of the sample has worn, broken yarn, fuzz or pilling serious, serious wear and other abnormal phenomena, it is judged to be unqualified.
5. When preparing samples, special attention should be paid to the cutting edge not to produce wool changes to avoid unnecessary quality loss and appearance changes.
6. Pay attention to operation standards and personnel safety during machine operation.

Maintenance:
1, the external cleaning and cleaning must be carried out regularly to ensure the cleanliness of the testing machine
2. Check it regularly to see if there are any abnormalities;
3, each user in the use of the process, should be in accordance with the correct use of the use, not illegal use, so as to avoid damage to the testing machine, resulting in shortening its service life;
4, each user after use, be sure to put it well, and do the corresponding cleaning to ensure cleanliness;
5. When not in use, the power supply of DIN wear testing machine should be turned off.

Teile diesen Beitrag