Kitt ist ein Baustoff auf Zementbasis, der aus Rohstoffen wie Zement hergestellt wird, Kalk und Quarzsand, which has good strength and durability. Putty is mainly used for decoration and waterproof coating of indoor and outdoor walls. Its surface has a certain smoothness and texture, and the color is usually gray or light gray. Putty can also be used to achieve a variety of color effects by adding different colors of pigments, suitable for different styles and occasions of decoration needs.

Leistung der Erkennung
The putty is a building material and it is necessary to examine some of the following performance parameters, which are very important for the production and use of putty. The following is a table of performance parameters:

Welche Eigenschaften sollten bei Spachtelmasse geprüft werden und wie?

Nachweismethode
The following is a detailed description of the testing method for various performance parameters of putty:

Construction performance: Observe the performance of putty coating, uniformity and ease of coating in the construction process, and test the construction performance by evaluating the appearance and quality of the coating.

Trockenzeit: Observing the drying time of the putty coating, you can judge whether the coating is dry by touching and scratching.

Strength: To measure the tensile strength and compressive strength of the putty sample, tensile test method and compression test method can be used to measure the tensile or compressive capacity of the sample under certain conditions.

Adhäsion: To measure the adhesion strength between the putty coating and the base layer, it can be tested using the peel test method, where the coating is torn off under certain conditions and the force required to tear off the coating is measured to evaluate the adhesion.

Haltbarkeit: To measure the weather resistance, water resistance and chemical resistance of putty samples under certain conditions, various experimental methods can be used for testing, such as humid heat test, salt spray test, acid and alkali immersion test, usw.

Environmental performance: To detect the content of harmful substances, volatile organic compounds and other environmental pollutants in the putty, various chemical analysis methods can be used for testing, such as gas chromatography, Flüssigkeits-Chromatographie, usw.

Welche Eigenschaften sollten bei Spachtelmasse geprüft werden und wie?

Anmerkungen
There are also some issues to be aware of when testing:

Probenvorbereitung: Sample preparation should be carried out in accordance with relevant standards or methods to ensure that the sample preparation process and conditions meet the requirements.

Experimental conditions: When performing various performance tests, experimental conditions, such as temperature, Feuchtigkeit, and pressure, need to be controlled to ensure the repeatability and accuracy of the experiments.

Test accuracy: For some performance parameters, such as compressive strength, Zugfestigkeit, usw., the test accuracy will be affected by many factors, such as sample preparation, experimental conditions, testing equipment, usw. It is necessary to pay attention to the control of these factors to improve the test accuracy.

Welche Eigenschaften sollten bei Spachtelmasse geprüft werden und wie?

Data analysis: After the completion of each test, statistics and analysis of the test data are required to determine the performance characteristics of the putty and evaluate its quality level.

Zusammenfassend, the performance testing of putty requires the use of different test methods and standards, and for some complex tests, professional laboratories or technicians are required to conduct them. Attention should be paid to the above problems during the test to ensure the accuracy and reliability of the test results. Gleichzeitig, when using putty, attention should also be paid to the operation according to the instructions to ensure better decorative effect and safety performance.