The test method in ASTM D3258 details a standard procedure for determining the porosity of white or near-white mineral oil insoluble paint films by staining to indicate the degree to which subsequent coatings will permeate.
abstraction

This test method details a standard procedure for determining the porosity of white or near-white mineral oil insoluble paint films by staining to indicate the degree to which subsequent coatings will permeate. The test method shall require the use of film coater, reflectometer, vacuum scraping plate, camel hair brush, plastic wash bottle, test plate, permeating medium and filter paper. The test paint is applied to a non-porous surface, air dried, and then the reflectivity is measured. A special color permeating medium is applied, excess medium is removed in a specified manner, and reflectivity is measured again. The difference between the two readings indicates porosity; The smaller the difference, the lower the porosity of the film and the stronger its permeability resistance.

This summary is a brief overview of the reference standards. It is for reference only and is not an official part of the standard; Reference is required to the full text of the standard itself for its use and application. ASTM makes no warranties of any kind, ipahayag o ipinahiwatig, at hindi kumakatawan na tumpak ang nilalaman ng abstrak na ito, complete or new.

ASTM D3258-19 Standard Test Method for Determination of Porosity of White or Near-White Paint Films by Staining

Hakbang 1: Saklaw

1.1 The test method includes the determination of the porosity of a white or near-white mineral oil insoluble paint film to indicate the degree of subsequent coating penetration.

1.2 The texture of the film will affect the cleaning and affect the test results. A stain applied to a high masking paint will not reduce reflectivity as much as the same stain applied to a low masking paint with equal porosity. These points need to be considered when comparing different coatings.

1.3 Values expressed in SI units shall be considered standard. Ang mga halaga na ibinigay sa mga panaklong ay para sa sanggunian lamang.

1.4 Ang pamantayang ito ay hindi nilayon upang matugunan ang lahat ng mga alalahanin sa kaligtasan, kung meron man, na nauugnay sa paggamit nito. Responsibilidad ng mga gumagamit ng pamantayang ito na magtatag ng angkop na kaligtasan, mga kasanayan sa kalusugan at kapaligiran at upang matukoy ang pagiging angkop ng mga paghihigpit sa regulasyon bago gamitin.

1.5 The international standard is based on internationally recognized standardization principles established in the “Desisyon sa Mga Prinsipyo para sa Pag unlad ng Internasyonal na Pamantayan, Mga Patnubay at Rekomendasyon” inisyu ng Committee on Technical Barriers to Trade (TBT) ng World Trade Organization.