Kahulugan at Layunin

5.1 Bilang ang brush paglaban ng pintura ay nagdaragdag, any natural tendency of the painter to overapply the paint will decrease. When all other factors are held constant, increasing brush resistance will result in greater film thickness, resulting in improved durability and concealment. Sa kabaligtaran, it may sometimes be preferred to use a lesser degree of brush drag for easier application (i.e., using a lesser degree of brush drag reduces the time and effort required to apply paint to a particular area).

5.2 This test method provides a standardized spawning procedure for assessing brush resistance as an alternative to the customary informal temporary procedure. The goal is to increase the reliability and precision of determining this feature as much as possible.

Tala 1: Brush drag of paint is directly related to its high shear viscosity. There is generally good ranking order agreement between the results obtained by this method and the test method D4287. The sensitivity of this brushout method has been found to be sufficient to distinguish brush rates corresponding to high shear viscosity differences of not less than 0.3 poise (0.03 Pa.s). The cyclic data show that the ranking order agreement between the brush and viscosity methods is poor when latex and solve-based coatings belong to the same comparison group. This is due to the fact that the two paint types have significantly different rheological properties that can affect the relative perception of brush resistance. four

ASTM D4958-2016 “Paghahambing ng Brushability ng Latex Paint”

Saklaw ng

1.1 This test method is a standardized brushing procedure for comparing brush resistance of architectural solvent-based coatings.

1.2 With slight modifications, this test method is also applicable to solvent-based coatings.

1.3 Values expressed in SI units shall be regarded as standards. Ang mga halaga na ibinigay sa mga panaklong ay para sa sanggunian lamang.

1.4 Ang pamantayang ito ay hindi nilayon upang matugunan ang lahat ng mga isyu sa kaligtasan, kung meron man, na nauugnay sa paggamit nito. Responsibilidad ng mga gumagamit ng pamantayang ito na magtatag ng angkop na mga kasanayan sa kaligtasan at kalusugan at upang matukoy ang pagiging angkop ng mga paghihigpit sa regulasyon bago gamitin.