Kahulugan at paggamit

5.1 This test method is intended to determine the concentration of known impurities in finished benzene and to be used as an overall quality control tool for the production or use of benzene in the manufacturing process. It is commonly applied to impurities such as non-aromatic compounds containing 9 or fewer carbons, toluene, C8 aromatic compounds, at 1, 4-dioxane.

5.2 If undetected impurities are present, absolute purity cannot be determined.

ASTM D7360-2016 Standard Test Method for Analysis of Benzene by Externally Calibrated Gas Chromatography

Hakbang 1: Saklaw

1.1 This test method includes the determination of normal trace impurities and purity of benzene in finished products by gas chromatography and external calibration. A similar test method using the internal standard calibration technique is test method D4492.

1.2 This test method is suitable for non-aromatic impurities with a content of 5 sa 2000 mg/kg and a benzene purity of 99.80% (by weight) or higher.

1.3 This test method is suitable for 5~2000 mg/kg of aromatic impurities in benzene.

1.4 The test method has been found to be suitable for heteroatomic species such as 1, 4-dioxane, 10 sa 2000 mg/kg in benzene.

1.5 The detection limits for aromatic impurities are 0.9 mg/kg, 2.7 mg/kg for 1, 4-dioxane, at 1.1 mg/kg for cyclohexane.

ASTM D7360-2016 Standard Test Method for Analysis of Benzene by Externally Calibrated Gas Chromatography

1.6 When using this method to determine the consistency of test results with applicable specifications, the results should be rounded according to the rounding method of Practice E29.

1.7 Ang mga pagpapahalagang ipinahayag sa mga yunit ng SI ay dapat ituring bilang mga pamantayang pagpapahalaga. Walang iba pang mga yunit ng pagsukat ang kasama sa pamantayang ito.

1.8 Ang pamantayang ito ay hindi nilayon upang matugunan ang lahat ng mga alalahanin sa kaligtasan, kung meron man, na nauugnay sa paggamit nito. Responsibilidad ng mga gumagamit ng pamantayang ito na magtatag ng angkop na mga kasanayan sa kaligtasan at kalusugan at upang matukoy ang pagiging angkop ng mga paghihigpit sa regulasyon bago gamitin. Tingnan sa Bahagi 9 for specific hazard descriptions.