Kahulugan at Layunin

5.1 The technique described provides an indirect measurement of the thickness of a material section up to a temperature of 93°C[200°F]. Measurements are made from one side of the object without touching the rear surface.

5.2 Ultrasonic thickness measurement is widely used for basic shapes and products of many materials, precision machinations of parts, and determination of process equipment wall thinness caused by corrosion and erosion.

5.3 For recommendations to determine the functionality and limitations of ultrasonic thickness gauges in specific applications, see the cited references.

ASTM E797-2021 Practice for Measuring Thickness by Artificial Ultrasonic Pulse Echo Contact Method

Saklaw ng

1.1 This Practice 2 provides guidance for measuring material thickness using the contact pulse echo method at temperatures not exceeding 93 °C [200 °F].

1.2 This practice is applicable to any material from which ultrasonic waves propagate at a constant velocity throughout the part and from which back-wall reflections can be obtained and resolved.

1.3 This practice is mainly applicable to planar elements with parallel surfaces and has limited applicability for elements with non-parallel or concentric surfaces (per 1.2).

1.4 Units-Values expressed in SI units or ink-pound units should be treated as standard values separately. The values specified in each system are not necessarily the same; Kaya nga, to ensure compliance with the standards, each system should be used independently of each other and the values of the two systems should not be combined.

1.5 Ang pamantayang ito ay hindi nilayon upang matugunan ang lahat ng mga isyu sa kaligtasan, kung meron man, na nauugnay sa paggamit nito. Responsibilidad ng gumagamit ng pamantayang ito na magtatag ng angkop na kaligtasan, mga kasanayan sa kalusugan at kapaligiran at upang matukoy ang pagiging angkop ng mga paghihigpit sa regulasyon bago gamitin.

1.6 Ang internasyonal na Pamantayang ito ay binuo alinsunod sa mga internasyonal na kinikilalang prinsipyo ng standardisasyon na itinatag sa Desisyon sa mga Prinsipyo para sa Pag unlad ng Internasyonal na Pamantayan, Mga Patnubay at Rekomendasyon na inilabas ng Komite sa mga Teknikal na Hadlang sa Kalakalan ng World Trade Organization.