Detection performance of coating base material and specific detection method thereof
The coating base material refers to the material used as the base and carrier in the coating, including resin, solvent, tagapuno, additive, atbp. Coating base material is the main source of coating properties, which has an important influence on the quality and properties of coatings. Under normal circumstances, the coating substrate needs to have certain adhesion, pagkatubig, tibay ng katawan, chemical stability and other characteristics to ensure the effect and durability of the coating in the application process. Common coating substrates include organic solvents, water-based resins, solvent-based resins, powder coatings and so on.
Pagganap ng pagtuklas
The performance testing items of coating base material vary according to the specific type of base material, and generally include the following aspects:
Physical properties: densidad, lagkit, pagkatubig, drying time, atbp.
Chemical properties: chemical stability, acid and alkali resistance, paglaban sa tubig, atbp.
Mechanical properties: tigas na tigas, strength, elastic modulus, atbp.
Thermal performance: high temperature resistance, thermal conductivity, atbp.
Optical properties: transparency, reflectivity, atbp.
Electrical properties: dielectric constant, conductivity, atbp.
The following is a brief description of the test items and methods for common performance parameters of coating base materials:
Detection performance of coating base material and specific detection method thereof
Parameter ng pagganap | Test item | Paraan ng pagtuklas |
---|---|---|
Physical property | Physical property | Densitometer measurement |
lagkit | Measurement using equipment such as a viscometer | |
mobility | It is judged by observing the flow of the sample on the inclined plate | |
Drying time | After drying the sample, the drying time was observed | |
Chemical property | Chemical stability | The sample is exposed to a specific environment to observe its chemical stability |
Acid-base resistance | Exposed to acid and alkali environment, observe its acid and alkali resistance | |
Water resistance | Soak the sample in water to observe its water resistance | |
Mechanical property | tigas na tigas | Use a hardness tester and other equipment to measure |
intensity | Through the sample stretching, compression and other tests obtained | |
Modulus of elasticity | Use the elastic modulus meter and other equipment to measure | |
Thermal performance | High temperature resistance | The sample is exposed to a high temperature environment to observe its high temperature resistance |
Thermal conductivity | Use thermal conductivity meter and other equipment to measure | |
Optical property | transparency | Measurement using equipment such as a light transmitter |
pagmumuni muni | Measurement using equipment such as reflectance meter | |
Electrical property | Dielectric constant | Measurement using equipment such as a dielectric constant tester |
Electric kondaktibiti | Measurement using equipment such as conductivity meter |
Paraan ng pagtuklas
The performance testing method of coating base material varies according to the type and performance parameters of the base material. The following takes several common performance parameters as an example to briefly introduce the testing method of coating base material:
Densidad ng katawan: The density meter is usually used for measurement, loading the sample into the density meter and reading the density value on the display.
Lagkit: Can be measured using a variety of methods, of which the commonly used is the rotary viscometer, you can also use the direct drawing method, drip method, atbp.
Chemical stability: The sample is exposed to a specific environment, tulad ng mataas na temperatura, high humidity, acid and alkali environment exposure test, observe the changes of the sample in different environments, tulad ng pagbabago ng kulay, physical property change, atbp.
Detection performance of coating base material and specific detection method thereof
Ang katigasan ng ulo: Use a hardness tester or Rockwell hardness tester to measure.
Lakas ng loob: Using equipment such as tensile testing machine or compression testing machine for measurement, the sample is placed in the equipment, the corresponding force is applied, and the change of the sample under different forces is measured to obtain its strength value.
High temperature resistance: The sample is exposed to a high temperature environment, such as exposure in a constant temperature oven for a certain time, and the changes of the sample are observed, such as weight changes, appearance changes, atbp.
Transparency: The transparency of the sample is obtained by using a device such as a light transmitter, where the sample is placed in a light transmitter and the intensity of light passing through the sample is measured.
Electrical properties: The use of dielectric constant tester, conductivity meter and other equipment for measurement, the sample is placed in the equipment, electrical properties test, so as to obtain the corresponding performance parameter values.
North at South tide nagpapaalala sa iyo: the performance testing method of the coating base material varies according to the type and performance parameters of the base material, at maaaring may ilang mga pamantayan at pagtutukoy ng industriya, for the performance testing of the coating base material, you should also choose the corresponding testing method according to the actual needs. Kasabay nito, in order to ensure the accuracy of the test results, the test equipment should be calibrated and maintained before the test.