paunang salita
ISO (International Organization para sa Standardisasyon) ay isang pandaigdigang alyansa ng mga pambansang pamantayan katawan (Mga katawan ng miyembro ng ISO). Ang pagbuo ng mga internasyonal na pamantayan ay karaniwang isinasagawa sa pamamagitan ng ISO teknikal na komite. Ang bawat institusyon ng miyembro na interesado sa isang paksa kung saan itinatag ang isang teknikal na komite ay may karapatang kumatawan sa komiteng iyon. Ang mga internasyonal na organisasyon ng pamahalaan at di pamahalaan na nakikipag ugnayan sa ISO ay kasangkot din sa gawaing ito. ISO ay gumagana nang malapit sa International Electrotechnical Commission (IEC) sa lahat ng bagay ng electrotechnical standardization.

Ang mga pamamaraan na ginamit upang bumuo ng dokumentong ito at ang mga ginagamit para sa karagdagang pagpapanatili ay inilarawan sa Bahagi 1 ng Direktiba ng ISO / IEC. Sa partikular na, tandaan ang iba't ibang mga pamantayan sa pag apruba na kinakailangan para sa iba't ibang uri ng mga dokumento ng ISO. Ang dokumentong ito ay na draft alinsunod sa mga patakaran sa pag edit sa Bahagi 2 ng Direktiba ng ISO / IEC (tingnan iso.org/directives).

Mangyaring tandaan na ang ilang mga nilalaman ng dokumentong ito ay maaaring sumailalim sa mga karapatan sa patent. Ang ISO ay hindi mananagot para sa pagtukoy ng anuman o lahat ng naturang patente. Ang mga detalye ng anumang mga karapatan sa patent na natukoy sa panahon ng paghahanda ng dokumento ay magiging sa pagpapakilala at / o listahan ng mga claim ng patent na natanggap ng ISO (tingnan iso.org/patents).

Ang anumang mga pangalan ng kalakalan na ginamit sa dokumentong ito ay impormasyong ibinigay para sa kaginhawahan ng gumagamit at hindi bumubuo ng isang endorsement.

Kusang loob, kaugnay na pamantayan at pag alinsunod pagtatasa kaugnay ISO tiyak na terminolohiya at ipahayag ang kahulugan ng at ang ISO sa mga teknikal na hadlang sa kalakalan (TBT) sumunod sa prinsipyo ng world trade organization (WTO) impormasyon, pakitingnan ang iso.org/iso/foreword.html.

ISO 1247-1-21st Aluminium Pigments for Paints – Bahagi 1: General Aluminium Pigments

This document has been prepared by the ISO/TC 256 Technical Committee on Pigments, Dyes and Fillers.

The first version of ISO 1247-1, together with ISO 1247-2, cancelled and replaced the technically revised ISO 1247-1974. It also incorporates the amendment to ISO 1247-1974 /Amd 1:1982.

The main changes from the previous edition are as follows:

— An introduction is added, explaining the reason for the division;

– The addition of a third article, mga tuntunin at kahulugan, and the inclusion of terms such as “non-volatile substances” at “masking power”;

– The distinction between surface treated and surface untreated aluminium pigments is introduced in articles 4 at 5;

— “Klase” in paragraph 4.2 is deleted;

— Change “105°C volatile substance” sa “non-volatile substance”;

— The original article 6 “Packaging” is deleted;

– Artikulo 7, sampling, has been reduced to a reference to ISO 15528;

– In Table 1, requirements and test methods of “specific surface area of pigment”, “pamamahagi ng laki ng partikulo” at “hiding power” and corresponding test methods are added and renamed as “Mga kinakailangan at mga pamamaraan ng pagsubok”;

— The test method of “manganese” is deleted from the metal impurities in Table 1;

Flame atomic absorption spectrometry was introduced to determine metal impurities.

— The original article 13 “unregulated blade force test” is deleted;

– Talahanayan 3, the test section, has been deleted;

— Artikulo 16 was added to determine concealment force;

— The normative references have been updated, and the texts have been edited and revised.

Isang listahan ng lahat ng mga bahagi sa ISO 1247 serye ay maaaring matagpuan sa ISO website.

Anumang feedback o mga katanungan tungkol sa dokumentong ito ay dapat na idirekta sa pambansang pamantayan ng katawan ng gumagamit. Ang kumpletong listahan ng mga institusyong ito ay matatagpuan sa www.iso.org/members.html.

ipakilala ang
Since the beginning of the new millennium, with advances in technology and product development, new aluminum pigments have flourished, and these aluminum pigments are used in a wide range of industrial sectors as heat or rust resistant coatings or colorants. Aluminium pigments can be conveniently divided into two groups according to their form: general aluminium pigments produced during milling and vacuum metallized aluminium pigments (VMPS) (tingnan ang ISO 1247-2). Because of the different technical requirements for aluminium pigments used in different fields, it is necessary to develop an international standard for each of these two groups.

To meet the needs of the marketing of aluminium pigments, this document describes the characteristics of “pamamahagi ng laki ng partikulo” at “hiding power” and their corresponding testing methods.

ISO 1247-1-21st Aluminium Pigments for Paints – Bahagi 1: General Aluminium Pigments

To improve the safety of aluminium pigments, low flash point organic solvents and additives have been replaced by high flash point reagents, “105°C volatile substances” has been replaced by “non-volatile substances”, and test methods have been developed in accordance with ISO 3251.

The previous edition (i.e. ISO 1247:1974) used different spectrophotometric methods for the determination of lead, iron and copper content, and ethylenediamine tetraacetic acid (EDTA) titration for the determination of zinc. These methods are cumbersome to operate. The method used to determine lead involves the use of potassium cyanate, a highly toxic agent rarely used since the 1990s. The method used to determine zinc is only suitable for samples with a total zinc content of 0.10% or more and is not suitable for the current status of the aluminum pigment industry. While these old methods are retained in this document, flame atomic absorption spectrometry is introduced as a new option for the determination of the above-mentioned metal impurities. This method is faster, easier to operate, has a wider detection range, and is becoming increasingly popular.

In order to use as few toxic agents as possible, this document uses 2-butoxy-ethyl alcohol or n-butyl acetate instead of acetone, which is now banned or restricted in many countries as a material that can be used in the manufacture of illicit drugs.

ISO 1247-1-21st Aluminium Pigments for Paints – Bahagi 1: General Aluminium Pigments

1 saklaw
This document specifies the requirements and corresponding test methods for aluminium pigments applicable to paint, kasama na ang:

a) General, decorative and protective coatings, at

b) Special finishing coatings.

2 Mga reperensyang normatibo
Ang mga sumusunod na file ay tinutukoy sa teksto sa paraang ang ilan o lahat ng nilalaman ay bumubuo sa mga kinakailangan ng dokumentong ito. Para sa mga petsang sanggunian, angkop ang mga bersyon na may pagbanggit lamang. Para sa mga walang petsang sanggunian, ang bagong bersyon ng sanggunian (kasama ang anumang mga rebisyon) angkop.

ISO 385, Mga kagamitan sa laboratoryo ng salamin – burette

– ISO 648, mga laboratory glassware – Single volume pipettes

ISO 793, aluminium and aluminium alloys – determination of iron – positive Philolin photometric method

ISO 795, aluminium and aluminium alloys — determination of copper content — oxalyl dihydrazine photometric method

– ISO 808, aluminium and aluminium alloys – determination of silicon – Spectrophotometric method using reduced silicon-molybdenum complexes

– ISO 1042, mga laboratory glassware – single label volumetric bottles

ISO 1784, Aluminium alloys — determination of zinc — EDTA titration method

ISO 3696, Analytical laboratory water – specifications and test methods

ISO 9277, Determination of specific surface area of solids by gas adsorption – BET method

ISO 13320, particle size analysis – laser diffraction method

ISO 15528, Mga Pintura, mga barnis at hilaw na materyales para sa mga pintura at barnis — Pag sampling

ISO 18451-1, mga pigment, dyes and fillers — terminology — Bahagi 1: General terminology

ISO 18451-2, mga pigment, dyes and fillers — terminology — Bahagi 2: Classification of coloring materials according to their colour and chemical aspects

3 Mga Tuntunin at Kahulugan
Para sa mga layunin ng dokumentong ito, ang mga termino at kahulugan na ibinigay sa ISO 18451-1, ISO 18451-2 at ang mga sumusunod na artikulo ay nalalapat.

3.1 Non-volatile substances

Mass residue obtained by evaporation under specified conditions

Tala 1: In place of the term “non-volatile substance”, different terms such as solids, dry residues, dry matter, solid matter, baking residues are often used together with their respective abbreviations. Ang terminong “non-volatile substances”, which is also applicable in ISO 3251, should be used with the abbreviation “NV” sa halip na mga terminong ito.

[Pinagmulan: ISO 4618:2014, 2.176]

3.2 Pagtakpan ang kapangyarihan

The ability of a tinting medium to hide the color or color difference of the substrate

[Pinagmulan: ISO 18314-2:2015, 2.1.6]

Ang standard information section lamang ang pampubliko. Upang makita ang buong nilalaman, kailangan mong bilhin ang pamantayan sa pamamagitan ng mga opisyal na channel.