Key katangian ng coil coating at ang paraan ng pagtuklas nito

Ang coil coating ay isang patong na inilapat sa ibabaw ng isang coil o film material, usually consisting of polymers, mga pigment, and additives. They can be applied in many different fields, such as building roofing, insulating materials, automotive, and aviation, among others. Coil coatings have good water resistance, weather resistance and UV resistance, which can improve the service life and performance of materials.

Pagganap ng pagtuklas

Pangalan ng pagganapEquipment to be used
Thickness of thicknessThickness gauge
Degree of viscosityViscosity gauge
Strength of tensionTensile testing machine
Pagpapahaba sa breakTensile testing machine
Water resistanceWater circulation plant
Resistance to weatherUltraviolet aging test chamber
Uv resistanceUltraviolet aging test chamber
Strength of bondShear strength tester
Coefficient of expansionThermal expansion coefficient tester

Key katangian ng coil coating at ang paraan ng pagtuklas nito

Hakbang ng pagtuklas
Ang kapal: Use a thickness gauge to measure the thickness of the coil coating, record the measured value and calculate the average value.

Lagkit: Use a viscometer to measure the viscosity of the coil coating, record the measured value and calculate the average value.

Tensile strength and elongation at break: tensile tests were carried out using a tensile testing machine, test data were recorded and tensile strength and elongation at break were calculated.

Water resistance: Place the coil coating in water using a water circulation device, record the time and observe the change of the coating.

Key katangian ng coil coating at ang paraan ng pagtuklas nito

Weather resistance and UV resistance: use UV aging test chamber to simulate solar radiation and atmospheric environment, observe the changes of coil coating.

Bond strength: Shear tests were performed using a shear strength tester, test data were recorded and bond strength was calculated.

Expansion coefficient: The expansion coefficient of the coil coating was measured using a thermal expansion coefficient tester, and the measured value was recorded and the average value was calculated.

Ibahagi ang post na ito