Coating Thickness Gauge LT220
- Paglalarawan
- Pagtatanong
Paglalarawan
Coating Thickness Gauge LT220
Mga Tampok:
- Two measuring methods: magnetism induction(F) and eddy current(N). When F probe is equipped, it can measure the non-magnetic coatings on magnetism substrate, when N probe is equipped, it can measure the non-conduction coating on non-magnetism substrate
- 8 types of probes are available for various application:F1,F1/90,F3,F10,F400,N1,N3,N400
- Two measuring modes:continue/single
- Two working modes: direct mode(DITECT) and Batch mode(APPL)
- 5 statistic ways:Mean values/Max.values/Min.values/Testing numbers(No.)/Standard deviations(S.Dev)
- Two measuring calibration modes
- With backlight display
- 640 measured values can be stored
- Low battery indication
- 2 switch off modes: manual and auto
Coating Thickness Gauge LT220
Teknikal na pagtutukoy
Saklaw ng pagsukat | See table in next page |
Probe available | |
Tolerance | |
Minimum resolution | |
Measuring condition | |
Operation language | Ingles/Tsino |
Standards | DIN,ISO,ASTM,BS |
Pag calibrate | Zero and foil calibration |
Interface | USB |
Statistic | Number of measurement, ibig sabihin nito, standard deviation, maximum and minimum |
Data memory | 640 readings |
Limits | Adjustable with alarm |
Suplay ng kuryente | NiMH rechargable battery |
Mga Dimensyon(mm) | 230×86×47 |
Operating environment | Temperatura:0~40 |
Humidity:20%~90% | |
No strong magnetic field |
Standard na Paghahatid
NAME | NUMBER |
Pangunahing yunit | 1 |
Probe(F1/N1) | 1 |
Substrate | 5 |
Calibration foil | 1 |
Instruction manual | 1 |
Communication cable | 1 |
Dataview software | 1 |