Pagputol ng Tester para sa Protective Gloves
This machine is used to test the strength of protective gloves and upper protection area.The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
- Paglalarawan
- Pagtatanong
Paglalarawan
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Layunin
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Tala
This test should not be used on parts made of very hard materials such as chain mail.
Prinsipyo
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
According to the standard: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Teknikal na parameter
| Load weight | 5N±0.05N | Laki ng sample | 100mm*80mm |
| Blade size | Japan OLFA tungsten alloy steel blade Hardness 740HV-800HV φ45±0.5mm, thickness 0.3mm | Cutting stroke | 50mm |
| Cutting speed | 10cm/s(blade sine speed) | Counter | 1-99999 |
| Suplay ng kuryente | AC220V±10% 50Hz | Laki ng instrumento | 550×400×250(L×W×H) |
| Ang bigat ng instrumento | 40KG |
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Configuration list:
host, 1 acrylic protective cover, 1 power cord, 2 blades, 10 pieces of filter paper, 1 roll of aluminum foil (20 meters), 5 pieces of cotton canvas.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Layunin
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Tala
This test should not be used on parts made of very hard materials such as chain mail.
Prinsipyo
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
According to the standard: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Layunin
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load
