DV1T / DV2T Series Touch Screen Viscometer
- Paglalarawan
- Pagtatanong
Paglalarawan
DV1T / DV2T Series Touch Screen Viscometer
Widely used in paint, pintura, cosmetics, ink, masa, pagkain, oil, starch, solvent adhesive, latex, biochemical products and other high viscosity industries.
Mga pangunahing tampok:
1 adopt ARM technology, built-in Linux system. The operation interface is simple and clear, through the creation of test program and data analysis, the viscosity test is carried out quickly and conveniently.
2.the viscosity test value is accurate : each measuring range is automatically calibrated by a computer , the precision is high , and the error is small ;
3.display is rich: in addition to viscosity (dynamic viscosity and kinematic viscosity), there are also temperature, bilis ng paggupit, shear stress, measurement value as a percentage of the full range value (graphic display, range overflow alarm, automatic scanning, Maximum measurement range, date, time and so on under current rotor speed combination. Show kinematic viscosity when density is known.
4.complete functions: timing measurement, self-built 30 groups of test programs, access to 30 groups of measurement data, real-time display of viscosity curves, printing data and curves;
5.front level: level adjustment is intuitionistic and convenient;
stepless speed regulation:
6.RV1T series: 0.3-100 rpm, a total of 998 rotational speeds
RV2T series: 0.1-200rpm, 2000 revolutions
7.showing the curve of shear rate versus viscosity : the range of shear rate can be set , and displayed on the computer in real time ;Curve of time – sa – viscosity can also be displayed
8.optional Pt100 temperature probe: wide temperature range, ranging from -20 ℃ to 300 °C, and measuring precision 0.1 °C;
9.Optional accessories rich: R1 rotor, temperature sensor, viscometer special thermostat bath, thermostat cup, printer, standard viscosity sample (standard silicone oil), atbp.；
The measurable range is very large, ranging from 100 sa 320 million MPA.
DV1T / DV2T Series Touch Screen Viscometer
Detalyadong teknikal na mga parameter:
| model | RVDV-1T | HADV-1T | HBDV-1T |
| Control / mode ng display | 5-inch color touch screen | ||
| bilis（r/min） | 0.3–100 infinitely variable speed , a total of 998 speed options | ||
| measuring range mPa.s | 100-13 million | 200-26 million | 800-104 million |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | |||
| rotor | R2 – R7（6, marking） R1（Optional） | ||
| Sample dosage | 500ml | ||
| error sa pagsukat（Newtonian likido） | ±1% | ||
| Repetition error (Newtonian likido) | ±0.5% | ||
| Display shear response / bilis ng paggupit | standard na pagsasaayos | ||
| Timing function | standard na pagsasaayos | ||
| Display viscosity curve | bilis ng paggupit – lagkit Temperature-viscosity Time-viscosity | ||
| kinematic viscosity | Density of sample to be input | ||
| temperatura measurement | Standard temperature probe interface (need to select temperature probe) | ||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | ||
| Maximum measurement range | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | ||
| Self-built measurement program | Save up to 30 mga grupo (including rotor, bilis, temperatura, oras na, atbp.) | ||
| Preservation of measurement results | Hanggang sa 30 sets of data can be stored (including viscosity, temperatura, rotor speed, bilis ng paggupit, shear stress, oras na, densidad, kinematic viscosity, atbp.) | ||
| i-print | Data, curves (marked with print interface, printer to be purchased) | ||
| interface ng output ng data | RS232 | ||
| Constant temperatura component | Selection (all kinds of viscometer special constant temperature slot, patuloy na temperatura tasa) | ||
| source | Wide voltage work (110V / 60Hz or 220V / 50Hz) | ||
| balangkas ng dimensyon | 300 × 300 × 450 mm) | ||
| model | RVDV-2T | HADV-2T | HBDV-2T | |
| Control / mode ng display | 5-inch color touch screen | |||
| bilis（r/min） | 0.1–200 infinitely variable speed , a total of 2000 speed options | |||
| measuring range mPa.s | 100-40 million | 200-80 million | 800-320 million | |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | ||||
| rotor | R2 – R7（6, marking） R1（Optional） | |||
| Sample dosage | 500ml | |||
| error sa pagsukat（Newtonian likido） | ±1% | |||
| Repetition error (Newtonian likido) | ±0.5% | |||
| Display shear response / bilis ng paggupit | standard na pagsasaayos | |||
| Timing function | standard na pagsasaayos | |||
| Display viscosity curve | bilis ng paggupit – lagkit Temperature-viscosity Time-viscosity | |||
| kinematic viscosity | Density of sample to be input | |||
| temperatura measurement | Standard temperature probe interface (need to select temperature probe) | |||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | |||
| Maximum measurement range | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | |||
| Self-built measurement program | Save up to 30 mga grupo (including rotor, bilis, temperatura, oras na, atbp.) | |||
| Preservation of measurement results | Hanggang sa 30 sets of data can be stored (including viscosity, temperatura, rotor speed, bilis ng paggupit, shear stress, oras na, densidad, kinematic viscosity, atbp.) | |||
| i-print | Data, curves (marked with print interface, printer to be purchased) | |||
| interface ng output ng data | RS232 | |||
| Constant temperatura component | Selection (all kinds of viscometer special constant temperature slot, patuloy na temperatura tasa) | |||
| source | Wide voltage work (110V / 60Hz or 220V / 50Hz) | |||
| balangkas ng dimensyon | 300 × 300 × 450 mm) | |||
