ISO1133, ASTM D1238 Melt Flow Rate Test Instrument
- Paglalarawan
- Pagtatanong
Paglalarawan
ISO1133, ASTM D1238 Melt Flow Rate Test Instrument Test Standard:
GB/T3682-2000,ISO1133-97, ASTM D1238
Discription:
ISO1133, ASTM D1238 Melt Flow Rate Test Instrument use for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.
Product Character:
1.English LCD Touched Screen.
2.Hand automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
5.Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
Test Methods:MFR Methods
Display Mode:English color touch screen display
Pagtutukoy
Modelo | LR-A001-A |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Outlet length | 8.000±0.025mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Saklaw ng temperatura | Room Temperature~450degree centigrade |
Pag iiba ng temperatura | ±0.2 ℃ |
Temperature uniformity | ±1℃ |
Temperature display resolution | 0.1°C |
Display resolution | 0.1°C |
Maximum comsuption | < 600W |
Time display resolution | 0.1s |
Weight parameters are as follows: | |
Weight accuracy | ±0.5% |
Basic configuration
| A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Position detection | |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 min. |
Material be installed | 1 min. |
Material sample temperature recovery time | 4 min. |
When binder set | 1min |
Output mode | Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
Test load | Eight sets of weights |
Kapangyarihan | AC220V±10% 50/60HZ |
Accessories List
Hindi | Name | Qty | Magsalita |
1 | Timbang | 1 itakda ang | 0.325㎏、0.875㎏、1.835㎏、2.5㎏、2.915㎏、3.475㎏、4.615kg、5.0k g |
2 | Weight tray | 1mga pc | Within level 1 load |
3 | Charging hopper | 1mga pc | |
4 | Mouth mold cleaning rod | 1mga pc | |
5 | Charging bar | 1mga pc | |
6 | Cylinder cleaning rod | 1mga pc | |
7 | piston rod | 1mga pc | |
8 | mouth mold | 1mga pc | |
9 | gauze | 2roll | |
10 | Print paper | 2 roll |
Standard test force(8 level)
1 level:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)
=3.187N
2 level:1.200 kg=(0.325+No2 0.875 bigat ng katawan)=11.77 N
3 level:2.160 kg=(0.325+No3 1.835 Timbang)=21.18 N
4 Level:3.800 kg=(0.325+No4 3.475Weight)=37.26 N
5 Level:5.000 kg=(0.325+No.5 4.675Weight)=49.03 N
6 Level:10.000 kg=(0.325+No.5 4.675weight+No.6 5.000Weight)=98.07 N
7 Level:12.000 kg=(0.325+No.5 4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
8 level:21.600 kg=(0.325+No.2 0.875weight+No3. 1.835+No.4
3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N