IZOD And Charpy Impact Tester LR-A004
Digital charpy impact testing machine is mainly used in hard plastic, reinforced nylon, glass fiber reinforced plastic, ceramic, cast stone, electrical insulating materials of nonmetal materials to the determination of impact toughness.Is the chemical industry, scientific research units, colleges and universities, quality inspection departments such as the ideal test equipment.
- Paglalarawan
- Pagtatanong
Paglalarawan
IZOD And Charpy Impact Tester LR-A004
Gumagamit ng mga:
This instrument for new multi-function IZOD&Charpy impact tester, without having to remove the jig and sample fixed frame, cantilever beam, the test method for automatic switch, madaling gamitin, simpleng operasyon, high measurement precision, it is mainly used for hard thermoplastic moulding and extrusion materials, rigid thermosetting molding materials as well as the fiber reinforced thermosetting and thermoplastic composites non-metallic materials, such as the determination of impact toughness.
IZOD And Charpy Impact Tester LR-A004
Pamantayan sa pagsusulit:
ISO179-2000 “mga plastik na – determination of impact strength of the simply supported beam with hard material,
GB/T 21189 < plastic beam and cantilever beam and tensile impact test with a pendulum impact testing machine test >
GB/T1043-2008 “the hard plastic beam impact test method”
GB/T8762-1998 plastic beam impact testing machine,
GB/T 18743-18743 “with thermoplastic fluid conveying pipe beam impact test method” (applicable to pipe)
ISO180-2000 “mga plastik na – determination of hard material cantilever beam impact strength
GB/T1843-2008 “the hard plastic cantilever beam impact test method”
GB/T8761-1998 plastic cantilever beam impact testing machine,
ASTM D256-2010 “test method for determination of plastic the IZOD pendulum impact strength,
GB – T13525-1992 “plastic tensile impact test method for performance”
IZOD And Charpy Impact Tester LR-A004
Technical Mga pagtutukoy
Pangalan | Digital IZOD&Charpy Impact tester | |
Modelo | LR-A004-5D | |
IZOD Specification | Epekto ng enerhiya | 5.5J,2.75J |
Elevation in advance | 150°(accuracy 0.01°) | |
impact speed | 3.5m/s | |
Pendulum center distance | 335mm | |
The impact blade radius of the cantilever beam | R=0.8±0.2mm | |
Impact blade to the surface distance of the tongs | 22mm±0.05mm | |
Centring sample piece | 1mga pc | |
Charpy specification | Elevation in advance | 150° |
Epekto ng enerhiya | 1J,2J,4J,5J | |
Impact speed | 2.9m/s | |
Pendulum center distance | 230mm | |
Beam support distance | 40mm,60mm(or 62mm)、70mm、95mm | |
Chapry Impact blade radius | R=2mm±0.5mm | |
Impact blade Angle | 30°±1° | |
Centring sample piece | 1mga pc | |
Kapangyarihan | AC220V±10% 50HZ |