- Paglalarawan
- Pagtatanong
Paglalarawan
LR-SDC-80 Water Drop Angle Tester
Buod
Contact Angle is the tangent line of the gas-liquid interface at the intersection point of gas, liquid and solid. This tangent line has an Angle between the liquid and the solid-liquid boundary. The measurement of contact Angle is the main method for surface performance detection nowadays.
LR-SDC-80 basic contact Angle measuring instrument adopts the principle of optical imaging to measure the surface contact Angle, wettability, surface energy and other properties of the sample by means of image profile analysis. The equipment has high cost performance, comprehensive functions and can meet the requirements of conventional sample surface wettability measurement.
LR-SDC-80 Water Drop Angle Tester
Paglalapat
Contact Angle measuring instrument is widely used in various industries, in the mobile phone manufacturing, glass manufacturing, surface treatment, material research, chemical and chemical industry, semiconductor manufacturing, paint and ink, electronic circuits, textile fiber, medical biological and other fields, contact Angle measurement has become an important instrument to evaluate the surface performance.
- Wetting behaviors of liquid on solid surface, such as spreading, infiltration and absorption, atbp., static contact Angle was measured by droplet method;
- Measurement of forward Angle, backward Angle, contact Angle lag, rolling Angle and dynamic contact Angle of materials on solid surface;
- Continuous real-time research and process recording of absorption materials, and curve analysis of contact Angle changes with time;
- Measurement of contact Angle of various special materials, such as powder, curved surface, superhydrophobic/superhydrophilic samples;
- Test the contact Angle of the material immersed in the liquid by adhesive drop method;
- Measurement of interfacial tension, polarity and dispersion components of various liquid surface by droplet method;
- Calculate the Surface free energy and analyze its polar dispersion component;
- Analyze the adherent work of liquid on solid surface to evaluate the uniformity and cleanliness of solid surface.
LR-SDC-80 Water Drop Angle Tester
Equipment Specifications
specification of equipment | |
Device host | |
Boundary dimension | 420mm (L) *150mm (W) *400mm (H) |
Timbang | 3.2KG |
Power supply | |
boltahe | 100~240VAC |
Kapangyarihan | 20W |
frequency | 50/60HZ |
Interspace | |
platform size | 130mm×150mm |
Maximum sample | 180mm×∞×30mm |
Sample table regulation | 3D manual adjustment (upgradable automatic) |
Manual adjustment, stroke 60mm, accuracy 0.1mm Left and right manual adjustment, stroke 35mm, accuracy 0.1mm Manual up and down adjustment, stroke 80mm, accuracy 0.1mm | |
Picture pick-up system | |
Image Maximum | 3000(H)× 2000(V) |
Maximum frame rate | 70fps |
Sensor | SONY 1/1.8″ |
spectrum | Black and white/Color |
ROI | kaugalian na |
Display line weight | kaugalian na |
time of exposure | kaugalian na |
power supply | 5 VDC USB port |
transfer | USB3 Vision |
Microscope objective | |
focal length | 100mm |
multiplying power | 8x |
Resolution scale | 6~12um |
Light source | |
uri ng | Single wavelength Industrial LED (Cold light) |
wave length | 460nm |
light field | 40mm×20mm |
lifetime | 50000Hour |
Lifetime | |
Drip system | Direct injection precision microinjector |
control mode | manual control |
Drop accuracy | 0.1μl |
injector | High precision airtight syringe |
capacity | 1000μl |
syringe needle | 0.51mm stainless steel super hydrophobic needle (pamantayan) |
Software | |
Contact Angle range | 0~180° |
resolution ratio | 0.01° |
Contact Angle measurement method | Fully automatic, semi-automatic, manual |
analysis mode | Stop drop method (2/3 state), bubble trapping method, seat drop method |
analytical method | Static analysis, dynamic analysis of increasing and shrinking liquid, dynamic analysis of wetting, real-time analysis, bilateral analysis, forward and backward Angle analysis |
test method | Circle method, ellipse/oblique ellipse method, differential circle/differential ellipse method, Young-lapalace, width and height method, tangent method, interval method |
Surface free energy | |
test method | Zisman, OWRK, WU, WU 2, Fowkes, Antonow, Berthelot, EOS, adhesion work, wetting work, spreading coefficient |
Data processing | |
output mode | Automatically generated, can export/print EXCEL, Word, spectrum and other report formats |