Buong Sapatos Sole Flexing Resistance Tester
- Paglalarawan
- Pagtatanong
Paglalarawan
Whole Shoes Sole Flexing Resistance Tester is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. Sa panahon ng pagsubok, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
Ii. Mga Pagtutukoy ng Produkto:
| Bending Angle | 90° | Diameter of circular shaft | φ30mm |
| Bending speed | 0~135 RPM | Width of fixture | 144mm |
| Also try | 3 soles | Count meter | LED, 0~99999999 |
| Ma Li | D at T, 375W | Dami ng | 85×31×65cm |
| Timbang | 68kg | Pinagmulan ng kuryente | 1∮ AV220V, 3A |
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
I. Saklaw ng aplikasyon:
The machine is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. Sa panahon ng pagsubok, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
I. Saklaw ng aplikasyon:
The machine is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. Sa panahon ng pagsubok, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
