Abstrait
This specification covers a pressure-sensitive tape for sealing and sealing slip-top containers, such as fibre tubes and metal cans. Mylar back pressure sensitive tape is designed to be used for sealing and sealing containers with sliding LIDS, such as spiral wound pipes and metal cans, where strength, résistance à l'eau, water vapor resistance and rain resistance and other deterioration factors are required. The tape shall meet the specified physical performance requirements. The following test methods shall be performed to meet the specified requirements: adhésion; Shear adhesion tensile thickness; Relax; Water permeability; Water vapor transmittance; And accelerate aging.

This summary is a brief summary of the reference standards. It is informational only and not a formal part of the standard; The full text of the standard itself needs to be used and applied for reference. ASTM provides no warranties, expresse ou implicite, et ne garantit pas que le contenu de ce résumé est exact, complete, or new.

Spécification standard ASTM D6590/D6590M-2020 pour le ruban sensible à la pression pour les conteneurs et réservoirs en fibre scellés

Étape 1: Portée
1.1 This specification covers a pressure-sensitive tape for sealing and sealing slip-top containers, such as fibre tubes and metal cans.

1.2 Values expressed in inch-pounds or SI units shall be treated as standards separately. Les valeurs spécifiées dans chaque système peuvent ne pas être exactement les mêmes; Donc, each system needs to be used independently and the values cannot be combined in any way.

1.3 The following safety hazard warnings apply only to the Test Methods section of this specification: This standard is not intended to address all safety hazards associated with use. Il est de la responsabilité des utilisateurs de cette norme d'établir des mesures de sécurité appropriées., spécifications sanitaires et environnementales et pour déterminer l’applicabilité des restrictions réglementaires avant utilisation.

1.4 Cette norme internationale est basée sur les principes de normalisation internationalement reconnus établis dans la Décision sur les principes pour l'élaboration de normes internationales., Lignes directrices et recommandations émises par l'OMC Obstacles techniques au commerce (OTC) Comité.

Spécification standard ASTM D6590/D6590M-2020 pour le ruban sensible à la pression pour les conteneurs et réservoirs en fibre scellés

2. Se référer au dossier
Norme ASTM

D996 Packaging and distribution environmental terms

Test method for peel adhesion of D3330 / D3330M pressure sensitive tape

D3611 pressure sensitive tape accelerated aging practice

Test method for thickness of D3652 / D3652M pressure sensitive tape

Test method for shear adhesion of D3654 / D3654M pressure sensitive tape

D3715 / Pratique d’assurance qualité du ruban sensible à la pression D3715M

Test method for breaking strength and elongation of D3759 / D3759M pressure sensitive tape

Test method for unwinding force of D3811 / D3811M pressure sensitive tape

Test method for water permeability of D3816 / D3816M pressure sensitive tape

Test method for water vapor transmittance of D3833 / D3833M pressure sensitive tape

D3951 Commercial packaging specification

D5570 used as a test method for water resistance of tapes and adhesives for box covers

ISO standard

OIN 9002