Notes du guide de sélection des planches de finesse
Qu'est-ce que la finesse?
Fineness is an important indicator for checking the particle size or dispersion uniformity of paint or paint paste, généralement exprimé en microns (µm). The fineness of the coating directly affects the gloss, appearance, corrosion resistance and storage stability of the coating. En général, the smaller the pigment particles, the higher the dispersion, the finer the fineness, the smoother the paint film, and the better the decorative effect.
Notes du guide de sélection des planches de finesse
Fineness board principle
Fineness is usually measured using a scraper fineness meter. It consists of a polished plate and a scraper with one or two graded deep grooves parallel to the long side. This design allows the groove depth to gradually decrease from one end to zero, allowing different pigments to be measured.
Fineness board classification
Groove style distinction: single slot (standard, small single slot, large single slot) and double slot (standard, small double slot, large double slot)
Range differentiation: 015μm~500μm
Resolution differentiation: usually 1μm~5μm, the specific indexing values correspond to different ranges
Unit classification: micron (un), Hegeman (H), MILS, North (PCU)
Notes du guide de sélection des planches de finesse
How to select fineness plate
Estimated fineness value, 30μm and below, select 50μm range scraper fineness meter; 31~70μm select 100μm range scraper fineness meter; Choose a 150μm range scraper fineness meter above 70μm. When there is no specific concept, ask the sample type:, understand the sample fineness range, select the corresponding range. Or understand the standard requirements, according to the relevant standards specify the fineness range to choose.
Single slot and double slot
Double-slot fineness plates improve reproducibility and reproducibility because they can be tested twice at the same time, especially in situations where high accuracy is required.
Notes du guide de sélection des planches de finesse
Reasons for price differences
Costs vary mainly because of differences in manufacturing accuracy and materials. Cheaper products may sacrifice precision and durability, while high-quality fineness boards require precise manufacturing and verification processes.
* Special materials such as corrosion-resistant materials such as ceramics can be used when there is a corrosive demand, not all suppliers can provide all types of fineness plates, especially when special materials and high precision requirements, you need to carefully choose the right supplier. Through the above guidance, I hope you can more clearly choose the fineness board that suits your needs. Souviens-toi, the right tools can increase productivity and ensure the final effect of paints and pigments.