Replacing the blade disc and mixing shaft of the disperser may vary depending on the equipment model and manufacturer. Voici les étapes générales:

Préparation: Make sure the disperser has been shut down and disconnected from the power supply. Retirez toutes les canalisations et pièces de connexion pertinentes et nettoyez la zone de travail..

Remove the leaf disc: Depending on the design of the disperser, it is usually necessary to remove the leaf disc. It may be necessary to use a tool, comme une clé, to unscrew the nut or bolt holding the blade disc. Be careful not to damage leaf discs or adjacent parts.

Comment changer le disque à lames et l'arbre d'agitation du disperseur?

Remove mixing shaft: Dans certains disperseurs, the mixing shaft can be removed directly from the leaf tray. Check for a nut or bolt that holds the mixing shaft in place and unscrew it using the appropriate tool.

Install new blade disc and mixing shaft: Insert the new blade disc and mixing shaft into place. Assurez-vous qu'ils sont correctement alignés et utilisez des écrous ou des boulons pour les maintenir en place..

Assembler d'autres pièces: reconnect the pipes and other related parts of the disperser. Make sure all connections are tight and reinstall gaskets, roulements, etc as needed.

Testing and commissioning: After reinstalling the blade disc and mixing shaft, restart the disperser and conduct testing and commissioning. S'assurer du bon fonctionnement de l'équipement et vérifier toute anomalie ou fuite.

Comment changer le disque à lames et l'arbre d'agitation du disperseur?

Veuillez noter que les étapes ci-dessus ne fournissent que des conseils généraux., and the specific steps may vary depending on the model number and manufacturer of the decentralized model. Donc, consult the equipment’s operating manual and follow the instructions provided by the manufacturer before performing any repair or replacement work. Aussi, if you are not familiar with the repair and maintenance operations of the disperser, consider consulting a professional technician or contacting the manufacturer for support and guidance.