Testeur de dureté à crayon électrique
- Description
- Enquête
Description
Testeur de dureté à crayon électrique
Introduction:
This machine is specially used for all kinds of finished products, tel que: mobile phone shell, MP3/MP4 shell, notebook computer shell and other kinds of home appliances digital product shell hardness test.The machine is electrically controlled, and the machine is driven by an AC speed-regulating motor to achieve left and right movement with low noise and stability.
Testeur de dureté à crayon électrique
paramètres techniques:
Test Angle | 45 degrés |
Charger: Ajustable | 500g, 750g, 1000g |
Test platform moving speed | 5~100 RPM, Ajustable |
Travel distance | 40mm |
Platform | approx. 12x17cm, can be fixed sample |
Source de courant | 220V / 50Hz |
Accessoires | 13 standard pencils, one for 6B~6H, one for 500g weight and two for 250g weight |
Testeur de dureté à crayon électrique
Caractéristiques:
- Suitable for testing the hardness of paint field, specifically used in metal coating, decorative materials, Cuir synthétique, etc..
- The test method of pencil hardness tester meets the requirements of ASTMD333, ISO15184, BS3900-E19, ECCA-T4/1 standard.
- Pencil hardness tester uses standard hardness to perform scratch test on the surface of tested products.To determine the surface hardness of the product according to the standard pencil hardness mark.
Testeur de dureté à crayon électrique
Test instructions:
The surface hardness of the coating layer is tested by scratching the surface of the coating layer with a hardness pencil. The hardness pencil is fixed at a 45° Angle, so that the front center of the pen is in contact with the surface of the coating layer, and the appropriate load is applied. According to a certain speed (JIS specification 0.5mm/ s), the test platform is moved to make the surface of the coating layer move through the pen center.The hardness of the coating is considered to be the softest pencil grade in which the coating does not cause damage (scratches)